Numerical study of creep damage behavior of thin film/substrate systems under indentation

B. X. Xu, J. S. Wan, B. Zhao, Z. F. Yue

Research output: Contribution to journalArticlepeer-review

6 Scopus citations

Abstract

A numerical study has been performed on the creep damage development of the thin film/substrate systems by the Kachanov-Rabothov damage law. The emphasis was to study the influence of the modulus ratio of the substrate to the thin film, the size of the indenter and the indentation stress. Results show that two obvious damage zones are found ahead of the indenter. One is at the, edge of the indenter, the other is at the interface ahead of the indenter edge. The influence of the modulus-ratio of the substrate to the thin film on the indentation damage is not obvious before a certain creep time, and later, the greater modulus ratio of the substrate to the thin film has the smaller damage rate. And the indentation depth rate and the damage rate are also affected by the size of the indenter and indentation stress.

Original languageEnglish
Pages (from-to)75-79
Number of pages5
JournalMaterialwissenschaft und Werkstofftechnik
Volume36
Issue number2
DOIs
StatePublished - Feb 2005

Keywords

  • Creep damage
  • Finite element
  • Indentation creep experiments
  • Thin film

Fingerprint

Dive into the research topics of 'Numerical study of creep damage behavior of thin film/substrate systems under indentation'. Together they form a unique fingerprint.

Cite this