Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control

Qiangang Guo; Yaohua Li; Yanjing Meng; Weiguo Liu

Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control

Qiangang Guo, Yaohua Li, Yanjing Meng, Weiguo Liu

School of Automation

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

7 Scopus citations

Abstract

In this paper, Matrix Converter fed motor system is studied, which integrates MC and MCM into a single unit, solves the problem of low voltage transfer ratio of MC, reduces the cost and increases the overall efficiency and the equipment ability. The mathematics model of Matrix Converter fed motor drive system in the static plane based on the fictitious link concept is given. A novel control method for Matrix Converter fed motor drive system is proposed which allows, under the unity input power factor and the required voltage vectors to implement the direct torque control (DTC). The simulations show that this way combines the advantages of Matrix Converter with the advantages of DTC.

Original language	English
Title of host publication	ICEMS 2005
Subtitle of host publication	Proceedings of the Eighth International Conference on Electrical Machines Systems
Pages	1069-1074
Number of pages	6
State	Published - 2005
Event	ICEMS 2005: 8th International Conference on Electrical Machines and Systems - Nanjing, China Duration: 27 Sep 2005 → 29 Sep 2005

Publication series

Name	ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems
Volume	2

Conference

Conference	ICEMS 2005: 8th International Conference on Electrical Machines and Systems
Country/Territory	China
City	Nanjing
Period	27/09/05 → 29/09/05

Keywords

Direct torque control
Induction motor
Matrix converter
Voltage source inverter

Cite this

Guo, Q., Li, Y., Meng, Y., & Liu, W. (2005). Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control. In ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines Systems (pp. 1069-1074). Article 1574944 (ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems; Vol. 2).

Guo, Qiangang ; Li, Yaohua ; Meng, Yanjing et al. / Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control. ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines Systems. 2005. pp. 1069-1074 (ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems).

@inproceedings{e6a105c36c5941ca9f33f8aa83d5e530,

title = "Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control",

abstract = "In this paper, Matrix Converter fed motor system is studied, which integrates MC and MCM into a single unit, solves the problem of low voltage transfer ratio of MC, reduces the cost and increases the overall efficiency and the equipment ability. The mathematics model of Matrix Converter fed motor drive system in the static plane based on the fictitious link concept is given. A novel control method for Matrix Converter fed motor drive system is proposed which allows, under the unity input power factor and the required voltage vectors to implement the direct torque control (DTC). The simulations show that this way combines the advantages of Matrix Converter with the advantages of DTC.",

keywords = "Direct torque control, Induction motor, Matrix converter, Voltage source inverter",

author = "Qiangang Guo and Yaohua Li and Yanjing Meng and Weiguo Liu",

year = "2005",

language = "英语",

isbn = "7506274078",

series = "ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems",

pages = "1069--1074",

booktitle = "ICEMS 2005",

note = "ICEMS 2005: 8th International Conference on Electrical Machines and Systems ; Conference date: 27-09-2005 Through 29-09-2005",

}

Guo, Q, Li, Y, Meng, Y & Liu, W 2005, Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control. in ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines Systems., 1574944, ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems, vol. 2, pp. 1069-1074, ICEMS 2005: 8th International Conference on Electrical Machines and Systems, Nanjing, China, 27/09/05.

Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control. / Guo, Qiangang; Li, Yaohua; Meng, Yanjing et al.
ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines Systems. 2005. p. 1069-1074 1574944 (ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems; Vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control

AU - Guo, Qiangang

AU - Li, Yaohua

AU - Meng, Yanjing

AU - Liu, Weiguo

PY - 2005

Y1 - 2005

N2 - In this paper, Matrix Converter fed motor system is studied, which integrates MC and MCM into a single unit, solves the problem of low voltage transfer ratio of MC, reduces the cost and increases the overall efficiency and the equipment ability. The mathematics model of Matrix Converter fed motor drive system in the static plane based on the fictitious link concept is given. A novel control method for Matrix Converter fed motor drive system is proposed which allows, under the unity input power factor and the required voltage vectors to implement the direct torque control (DTC). The simulations show that this way combines the advantages of Matrix Converter with the advantages of DTC.

AB - In this paper, Matrix Converter fed motor system is studied, which integrates MC and MCM into a single unit, solves the problem of low voltage transfer ratio of MC, reduces the cost and increases the overall efficiency and the equipment ability. The mathematics model of Matrix Converter fed motor drive system in the static plane based on the fictitious link concept is given. A novel control method for Matrix Converter fed motor drive system is proposed which allows, under the unity input power factor and the required voltage vectors to implement the direct torque control (DTC). The simulations show that this way combines the advantages of Matrix Converter with the advantages of DTC.

KW - Direct torque control

KW - Induction motor

KW - Matrix converter

KW - Voltage source inverter

UR - http://www.scopus.com/inward/record.url?scp=33846984289&partnerID=8YFLogxK

M3 - 会议稿件

AN - SCOPUS:33846984289

SN - 7506274078

SN - 9787506274074

T3 - ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems

SP - 1069

EP - 1074

BT - ICEMS 2005

T2 - ICEMS 2005: 8th International Conference on Electrical Machines and Systems

Y2 - 27 September 2005 through 29 September 2005

ER -

Guo Q, Li Y, Meng Y, Liu W. Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control. In ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines Systems. 2005. p. 1069-1074. 1574944. (ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems).

Modeling and simulation study on matrix converter fed induction motor drive system implemented by direct torque control

Abstract

Publication series

Conference

Keywords

Other files and links

Fingerprint

Cite this