Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part

En Zhi Gao; Hong Wei Li; Hong Chao Kou; Hui Chang; Jin Shan Li; Lian Zhou

doi:10.3969/j.issn.1007-2012.2009.03.012

Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part

En Zhi Gao, Hong Wei Li, Hong Chao Kou, Hui Chang, Jin Shan Li, Lian Zhou

School of Materials Sience and Engineering

Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

Abstract

In this paper, the deep drawing of TA0 titanium hemispherical part is studied by numerical simulation and experiment method. After an investigation on the rules of this deep drawing process, a virtual orthogonal experimental design is adopted to determine the significance of processing parameters, die radius, blank holder force and friction coefficient, on the forming process. The results show that the die radius, blank holder force and friction coefficient are all significant on the forming process.

Original language	English
Pages (from-to)	59-63
Number of pages	5
Journal	Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
Volume	16
Issue number	3
DOIs	https://doi.org/10.3969/j.issn.1007-2012.2009.03.012
State	Published - Jun 2009

Keywords

Deep drawing
Numerical simulation
Process parameter
Titanium surface part

Access to Document

10.3969/j.issn.1007-2012.2009.03.012

Cite this

@article{488c0a898a374f75b4cf882c5404e0af,

title = "Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part",

abstract = "In this paper, the deep drawing of TA0 titanium hemispherical part is studied by numerical simulation and experiment method. After an investigation on the rules of this deep drawing process, a virtual orthogonal experimental design is adopted to determine the significance of processing parameters, die radius, blank holder force and friction coefficient, on the forming process. The results show that the die radius, blank holder force and friction coefficient are all significant on the forming process.",

keywords = "Deep drawing, Numerical simulation, Process parameter, Titanium surface part",

author = "Gao, {En Zhi} and Li, {Hong Wei} and Kou, {Hong Chao} and Hui Chang and Li, {Jin Shan} and Lian Zhou",

year = "2009",

month = jun,

doi = "10.3969/j.issn.1007-2012.2009.03.012",

language = "英语",

volume = "16",

pages = "59--63",

journal = "Suxing Gongcheng Xuebao/Journal of Plasticity Engineering",

issn = "1007-2012",

publisher = "Beijing Res. Inst. of Mechanical and Elec. Technology",

number = "3",

}

TY - JOUR

T1 - Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part

AU - Gao, En Zhi

AU - Li, Hong Wei

AU - Kou, Hong Chao

AU - Chang, Hui

AU - Li, Jin Shan

AU - Zhou, Lian

PY - 2009/6

Y1 - 2009/6

N2 - In this paper, the deep drawing of TA0 titanium hemispherical part is studied by numerical simulation and experiment method. After an investigation on the rules of this deep drawing process, a virtual orthogonal experimental design is adopted to determine the significance of processing parameters, die radius, blank holder force and friction coefficient, on the forming process. The results show that the die radius, blank holder force and friction coefficient are all significant on the forming process.

AB - In this paper, the deep drawing of TA0 titanium hemispherical part is studied by numerical simulation and experiment method. After an investigation on the rules of this deep drawing process, a virtual orthogonal experimental design is adopted to determine the significance of processing parameters, die radius, blank holder force and friction coefficient, on the forming process. The results show that the die radius, blank holder force and friction coefficient are all significant on the forming process.

KW - Deep drawing

KW - Numerical simulation

KW - Process parameter

KW - Titanium surface part

UR - http://www.scopus.com/inward/record.url?scp=66849143173&partnerID=8YFLogxK

U2 - 10.3969/j.issn.1007-2012.2009.03.012

DO - 10.3969/j.issn.1007-2012.2009.03.012

M3 - 文章

AN - SCOPUS:66849143173

SN - 1007-2012

VL - 16

SP - 59

EP - 63

JO - Suxing Gongcheng Xuebao/Journal of Plasticity Engineering

JF - Suxing Gongcheng Xuebao/Journal of Plasticity Engineering

IS - 3

ER -

Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this