In-situ preparation of TiB2-TiB-Ti functionally graded materials by improved sintering process

Guoxi Liu; Kezhi Li; Jinyong Zhang; Fan Zhang

doi:10.1007/s11595-015-1216-4

In-situ preparation of TiB₂-TiB-Ti functionally graded materials by improved sintering process

Guoxi Liu, Kezhi Li, Jinyong Zhang, Fan Zhang

School of Materials Sience and Engineering

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

An improved multi-step sintering process was used to in-situ prepare TiB₂-TiB-Ti FGMs. According to the sintering temperatures, the functionally graded materials (FGMs) were divided into three sections. After sintering at a proper temperature, the three sections were sintered together in turn. The experimental results showed that there were no obvious pores and cracks in the whole TiB₂-TiB-Ti FGMs, and no delamination was found in the impacting test with good performance features, which indicated that there were no interface effects in FGMs during penetration, so that the TiB₂-TiB-Ti FGMs were an ideal FGM.

Original language	English
Pages (from-to)	710-714
Number of pages	5
Journal	Journal Wuhan University of Technology, Materials Science Edition
Volume	30
Issue number	4
DOIs	https://doi.org/10.1007/s11595-015-1216-4
State	Published - 30 Aug 2015

Keywords

Fabrication
FGMs
Ti
TiB

Access to Document

10.1007/s11595-015-1216-4

Cite this

@article{e173e1f230564392bd715b2872841748,

title = "In-situ preparation of TiB2-TiB-Ti functionally graded materials by improved sintering process",

abstract = "An improved multi-step sintering process was used to in-situ prepare TiB2-TiB-Ti FGMs. According to the sintering temperatures, the functionally graded materials (FGMs) were divided into three sections. After sintering at a proper temperature, the three sections were sintered together in turn. The experimental results showed that there were no obvious pores and cracks in the whole TiB2-TiB-Ti FGMs, and no delamination was found in the impacting test with good performance features, which indicated that there were no interface effects in FGMs during penetration, so that the TiB2-TiB-Ti FGMs were an ideal FGM.",

keywords = "Fabrication, FGMs, Ti, TiB",

author = "Guoxi Liu and Kezhi Li and Jinyong Zhang and Fan Zhang",

note = "Publisher Copyright: {\textcopyright} 2015, Wuhan University of Technology and Springer-Verlag Berlin Heidelberg.",

year = "2015",

month = aug,

day = "30",

doi = "10.1007/s11595-015-1216-4",

language = "英语",

volume = "30",

pages = "710--714",

journal = "Journal Wuhan University of Technology, Materials Science Edition",

issn = "1000-2413",

publisher = "Springer Verlag",

number = "4",

}

TY - JOUR

T1 - In-situ preparation of TiB2-TiB-Ti functionally graded materials by improved sintering process

AU - Liu, Guoxi

AU - Li, Kezhi

AU - Zhang, Jinyong

AU - Zhang, Fan

PY - 2015/8/30

Y1 - 2015/8/30

N2 - An improved multi-step sintering process was used to in-situ prepare TiB2-TiB-Ti FGMs. According to the sintering temperatures, the functionally graded materials (FGMs) were divided into three sections. After sintering at a proper temperature, the three sections were sintered together in turn. The experimental results showed that there were no obvious pores and cracks in the whole TiB2-TiB-Ti FGMs, and no delamination was found in the impacting test with good performance features, which indicated that there were no interface effects in FGMs during penetration, so that the TiB2-TiB-Ti FGMs were an ideal FGM.

AB - An improved multi-step sintering process was used to in-situ prepare TiB2-TiB-Ti FGMs. According to the sintering temperatures, the functionally graded materials (FGMs) were divided into three sections. After sintering at a proper temperature, the three sections were sintered together in turn. The experimental results showed that there were no obvious pores and cracks in the whole TiB2-TiB-Ti FGMs, and no delamination was found in the impacting test with good performance features, which indicated that there were no interface effects in FGMs during penetration, so that the TiB2-TiB-Ti FGMs were an ideal FGM.

KW - Fabrication

KW - FGMs

KW - Ti

KW - TiB

UR - http://www.scopus.com/inward/record.url?scp=84938065511&partnerID=8YFLogxK

U2 - 10.1007/s11595-015-1216-4

DO - 10.1007/s11595-015-1216-4

M3 - 文章

AN - SCOPUS:84938065511

SN - 1000-2413

VL - 30

SP - 710

EP - 714

JO - Journal Wuhan University of Technology, Materials Science Edition

JF - Journal Wuhan University of Technology, Materials Science Edition

IS - 4

ER -

In-situ preparation of TiB₂-TiB-Ti functionally graded materials by improved sintering process

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this