FE simulation of grain size during the isothermal forging of a TC6 titanium alloy disc

A. M. Xiong; W. C. Huang; S. H. Chen; M. Q. Li

doi:10.4028/0-87849-960-1.3177

FE simulation of grain size during the isothermal forging of a TC6 titanium alloy disc

A. M. Xiong, W. C. Huang, S. H. Chen, M. Q. Li

School of Materials Sience and Engineering

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Abstract

Isothermal compression tests were conducted at Thermecmaster-Z simulator, and grain size of the prior α phase was measured at a Leica LABOR-LUX12MFS/ST microscope for quantitative metallography. A methodology to establish a constitutive equation with grain size was proposed with the help of the experimental results. Combining FEM and the present constitutive equation at high temperature deformation, grain size of the prior α phase was simulated during the isothermal forging of a TC6 titanium alloy disc. The present results illustrate grain size and distribution of the prior α phase in the forging process of TC6 titanium alloy disc in detail. The maximum difference between the calculated results and the experimental is not more than 15%.

Original language	English
Pages (from-to)	3177-3180
Number of pages	4
Journal	Materials Science Forum
Volume	475-479
Issue number	IV
DOIs	https://doi.org/10.4028/0-87849-960-1.3177
State	Published - 2005
Event	PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing - Beijing, China Duration: 2 Nov 2004 → 5 Nov 2004

Keywords

FE simulation
Grain size
Isothermal forging
Titanium alloy

Access to Document

10.4028/0-87849-960-1.3177

Cite this

@article{ad8d34ab5c5a4bfeb6b917c320668e05,

title = "FE simulation of grain size during the isothermal forging of a TC6 titanium alloy disc",

abstract = "Isothermal compression tests were conducted at Thermecmaster-Z simulator, and grain size of the prior α phase was measured at a Leica LABOR-LUX12MFS/ST microscope for quantitative metallography. A methodology to establish a constitutive equation with grain size was proposed with the help of the experimental results. Combining FEM and the present constitutive equation at high temperature deformation, grain size of the prior α phase was simulated during the isothermal forging of a TC6 titanium alloy disc. The present results illustrate grain size and distribution of the prior α phase in the forging process of TC6 titanium alloy disc in detail. The maximum difference between the calculated results and the experimental is not more than 15%.",

keywords = "FE simulation, Grain size, Isothermal forging, Titanium alloy",

author = "Xiong, {A. M.} and Huang, {W. C.} and Chen, {S. H.} and Li, {M. Q.}",

year = "2005",

doi = "10.4028/0-87849-960-1.3177",

language = "英语",

volume = "475-479",

pages = "3177--3180",

journal = "Materials Science Forum",

issn = "0255-5476",

publisher = "Trans Tech Publications Ltd",

number = "IV",

note = "PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing ; Conference date: 02-11-2004 Through 05-11-2004",

}

TY - JOUR

T1 - FE simulation of grain size during the isothermal forging of a TC6 titanium alloy disc

AU - Xiong, A. M.

AU - Huang, W. C.

AU - Chen, S. H.

AU - Li, M. Q.

PY - 2005

Y1 - 2005

N2 - Isothermal compression tests were conducted at Thermecmaster-Z simulator, and grain size of the prior α phase was measured at a Leica LABOR-LUX12MFS/ST microscope for quantitative metallography. A methodology to establish a constitutive equation with grain size was proposed with the help of the experimental results. Combining FEM and the present constitutive equation at high temperature deformation, grain size of the prior α phase was simulated during the isothermal forging of a TC6 titanium alloy disc. The present results illustrate grain size and distribution of the prior α phase in the forging process of TC6 titanium alloy disc in detail. The maximum difference between the calculated results and the experimental is not more than 15%.

AB - Isothermal compression tests were conducted at Thermecmaster-Z simulator, and grain size of the prior α phase was measured at a Leica LABOR-LUX12MFS/ST microscope for quantitative metallography. A methodology to establish a constitutive equation with grain size was proposed with the help of the experimental results. Combining FEM and the present constitutive equation at high temperature deformation, grain size of the prior α phase was simulated during the isothermal forging of a TC6 titanium alloy disc. The present results illustrate grain size and distribution of the prior α phase in the forging process of TC6 titanium alloy disc in detail. The maximum difference between the calculated results and the experimental is not more than 15%.

KW - FE simulation

KW - Grain size

KW - Isothermal forging

KW - Titanium alloy

UR - http://www.scopus.com/inward/record.url?scp=17044389820&partnerID=8YFLogxK

U2 - 10.4028/0-87849-960-1.3177

DO - 10.4028/0-87849-960-1.3177

M3 - 会议文章

AN - SCOPUS:17044389820

SN - 0255-5476

VL - 475-479

SP - 3177

EP - 3180

JO - Materials Science Forum

JF - Materials Science Forum

IS - IV

T2 - PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing

Y2 - 2 November 2004 through 5 November 2004

ER -

FE simulation of grain size during the isothermal forging of a TC6 titanium alloy disc

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this