Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator

Rui Wang; Weiguo Liu; Tao Meng; Chenghao Sun

doi:10.1109/ICEMS.2019.8921649

Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator

Rui Wang, Weiguo Liu, Tao Meng, Chenghao Sun

School of Automation

Northwestern Polytechnical University Xian

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

Accurate feedback of rotor position is necessary in a Wound Rotor Synchronous Starter/Generator (WRSSG) drive system, which is an great challenge to the reliability of position sensor. In case of failure of position sensor, this paper proposed a fault tolerant control (FTC) method for WRSSG based on Maximum Likelihood Voting (MLV) algorithm with two virtual sensors. When the position sensor fails, the MLV algorithm votes the most accurate position from the virtual sensors as the feedback signal of the control system. The simulation results on a WRSSG verify the feasibility of the fault-tolerant control method.

Original language	English
Title of host publication	2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728133980
DOIs	https://doi.org/10.1109/ICEMS.2019.8921649
State	Published - Aug 2019
Event	22nd International Conference on Electrical Machines and Systems, ICEMS 2019 - Harbin, China Duration: 11 Aug 2019 → 14 Aug 2019

Publication series

Name	2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

Conference

Conference	22nd International Conference on Electrical Machines and Systems, ICEMS 2019
Country/Territory	China
City	Harbin
Period	11/08/19 → 14/08/19

Keywords

fault tolerant control
high frequency voltage injection
maximum likelihood voting
position sensor
sliding mode observer

Access to Document

10.1109/ICEMS.2019.8921649

Cite this

Wang, R., Liu, W., Meng, T., & Sun, C. (2019). Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator. In 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 Article 8921649 (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEMS.2019.8921649

@inproceedings{c1b670f7bedb4fc0a63c447599b88112,

title = "Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator",

abstract = "Accurate feedback of rotor position is necessary in a Wound Rotor Synchronous Starter/Generator (WRSSG) drive system, which is an great challenge to the reliability of position sensor. In case of failure of position sensor, this paper proposed a fault tolerant control (FTC) method for WRSSG based on Maximum Likelihood Voting (MLV) algorithm with two virtual sensors. When the position sensor fails, the MLV algorithm votes the most accurate position from the virtual sensors as the feedback signal of the control system. The simulation results on a WRSSG verify the feasibility of the fault-tolerant control method.",

keywords = "fault tolerant control, high frequency voltage injection, maximum likelihood voting, position sensor, sliding mode observer",

author = "Rui Wang and Weiguo Liu and Tao Meng and Chenghao Sun",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 ; Conference date: 11-08-2019 Through 14-08-2019",

year = "2019",

month = aug,

doi = "10.1109/ICEMS.2019.8921649",

language = "英语",

series = "2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019",

}

Wang, R, Liu, W, Meng, T & Sun, C 2019, Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator. in 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019., 8921649, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019, Institute of Electrical and Electronics Engineers Inc., 22nd International Conference on Electrical Machines and Systems, ICEMS 2019, Harbin, China, 11/08/19. https://doi.org/10.1109/ICEMS.2019.8921649

Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator. / Wang, Rui; Liu, Weiguo; Meng, Tao et al.
2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8921649 (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator

AU - Wang, Rui

AU - Liu, Weiguo

AU - Meng, Tao

AU - Sun, Chenghao

PY - 2019/8

Y1 - 2019/8

N2 - Accurate feedback of rotor position is necessary in a Wound Rotor Synchronous Starter/Generator (WRSSG) drive system, which is an great challenge to the reliability of position sensor. In case of failure of position sensor, this paper proposed a fault tolerant control (FTC) method for WRSSG based on Maximum Likelihood Voting (MLV) algorithm with two virtual sensors. When the position sensor fails, the MLV algorithm votes the most accurate position from the virtual sensors as the feedback signal of the control system. The simulation results on a WRSSG verify the feasibility of the fault-tolerant control method.

AB - Accurate feedback of rotor position is necessary in a Wound Rotor Synchronous Starter/Generator (WRSSG) drive system, which is an great challenge to the reliability of position sensor. In case of failure of position sensor, this paper proposed a fault tolerant control (FTC) method for WRSSG based on Maximum Likelihood Voting (MLV) algorithm with two virtual sensors. When the position sensor fails, the MLV algorithm votes the most accurate position from the virtual sensors as the feedback signal of the control system. The simulation results on a WRSSG verify the feasibility of the fault-tolerant control method.

KW - fault tolerant control

KW - high frequency voltage injection

KW - maximum likelihood voting

KW - position sensor

KW - sliding mode observer

UR - http://www.scopus.com/inward/record.url?scp=85077113427&partnerID=8YFLogxK

U2 - 10.1109/ICEMS.2019.8921649

DO - 10.1109/ICEMS.2019.8921649

M3 - 会议稿件

AN - SCOPUS:85077113427

T3 - 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

BT - 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 22nd International Conference on Electrical Machines and Systems, ICEMS 2019

Y2 - 11 August 2019 through 14 August 2019

ER -

Wang R, Liu W, Meng T, Sun C. Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator. In 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8921649. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019). doi: 10.1109/ICEMS.2019.8921649

Fault-Tolerant Control of Position Sensor for Wound-Rotor Synchronous Starter/Generator

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this