Co/Mo₂C-Embedded N-Doped Carbon Nanotubes Combined with Molecularly Imprinted Membranes for Selective Electrocatalytic Determination of Imidacloprid

Developing a catalyst with excellent electrical conductivity and catalytic performance for on-site testing of residual imidacloprid is significant and challenging. In situ growth of Mo₂C nanodots on Co-induced N-doped carbon nanotubes (Co/Mo₂C/N-CNT) was synthesized to construct a molecularly imprinted electrochemical sensor for the detection of imidacloprid. The results proved that the catalytic performance of Co/Mo₂C/N-CNT for imidacloprid was over two times higher than those of Co/N-CNT and commercial CNT. This improvement was attributed to the formation of a heterostructure between Co species, Mo₂C, and N-CNT, which facilitated highly exposed catalytic active sites. Additionally, the abundant Mo₂C nano-dots promoted interfacial charge transfer to achieve optimal dynamics. The optimum preparation parameters of the catalysts were obtained by response surface methodology. By analyzing the relationship between different pH values and peak potential, as well as the influence of different scanning rates on peak potential, it was deduced that the possible electrocatalytic mechanism of imidacloprid involved the reduction of the nitro group to a hydroxylamine group and H₂O. Under optimal conditions, the limit of detection (LOD) was 0.033 × 10⁻⁶ mol·L⁻¹ (R² = 0.99698), and the linear range was 0.1 × 10⁻⁶~100 × 10⁻⁶ mol·L⁻¹. The application effect of the prepared sensor was evaluated by measuring the imidacloprid in two kinds of tea, indicating that the sensor possessed good sensitivity and selectivity, and was capable of meeting the requirements of on-site detection.