Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy

Xin rui Song; He jun Li; Xierong Zeng; Leilei Zhang

doi:10.1016/j.matlet.2016.07.111

Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy

Xin rui Song, He jun Li, Xierong Zeng, Leilei Zhang

School of Materials Sience and Engineering

Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

62 Scopus citations

Abstract

Graphene nanoplatelets (GNPs) were used as reinforcement in the TiCuZrNi brazing alloy for joining carbon/carbon composites (C/C) to Ti6Al4V. The microstructure and fracture behavior of bonded joints were investigated. The results showed that the shear strength of C/C-Ti6Al4V joints with GNPs was much higher than that of the joints without GNPS. The improvement of shear strength was mainly caused by the fact that the existence of TiC particles and GNPS in braze, which could reduce the CTE of brazing alloy and alleviate the residual stresses at the interface of C/C and braze.

Original language	English
Pages (from-to)	232-235
Number of pages	4
Journal	Materials Letters
Volume	183
DOIs	https://doi.org/10.1016/j.matlet.2016.07.111
State	Published - 15 Nov 2016

Keywords

Brazing
Graphene nanoplatelets
Mechanical property
Microstructure

Access to Document

10.1016/j.matlet.2016.07.111

Cite this

@article{04efb43a2dfb4489ace7758720c90478,

title = "Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy",

abstract = "Graphene nanoplatelets (GNPs) were used as reinforcement in the TiCuZrNi brazing alloy for joining carbon/carbon composites (C/C) to Ti6Al4V. The microstructure and fracture behavior of bonded joints were investigated. The results showed that the shear strength of C/C-Ti6Al4V joints with GNPs was much higher than that of the joints without GNPS. The improvement of shear strength was mainly caused by the fact that the existence of TiC particles and GNPS in braze, which could reduce the CTE of brazing alloy and alleviate the residual stresses at the interface of C/C and braze.",

keywords = "Brazing, Graphene nanoplatelets, Mechanical property, Microstructure",

author = "Song, {Xin rui} and Li, {He jun} and Xierong Zeng and Leilei Zhang",

note = "Publisher Copyright: {\textcopyright} 2016 Elsevier B.V.",

year = "2016",

month = nov,

day = "15",

doi = "10.1016/j.matlet.2016.07.111",

language = "英语",

volume = "183",

pages = "232--235",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy

AU - Song, Xin rui

AU - Li, He jun

AU - Zeng, Xierong

AU - Zhang, Leilei

PY - 2016/11/15

Y1 - 2016/11/15

N2 - Graphene nanoplatelets (GNPs) were used as reinforcement in the TiCuZrNi brazing alloy for joining carbon/carbon composites (C/C) to Ti6Al4V. The microstructure and fracture behavior of bonded joints were investigated. The results showed that the shear strength of C/C-Ti6Al4V joints with GNPs was much higher than that of the joints without GNPS. The improvement of shear strength was mainly caused by the fact that the existence of TiC particles and GNPS in braze, which could reduce the CTE of brazing alloy and alleviate the residual stresses at the interface of C/C and braze.

AB - Graphene nanoplatelets (GNPs) were used as reinforcement in the TiCuZrNi brazing alloy for joining carbon/carbon composites (C/C) to Ti6Al4V. The microstructure and fracture behavior of bonded joints were investigated. The results showed that the shear strength of C/C-Ti6Al4V joints with GNPs was much higher than that of the joints without GNPS. The improvement of shear strength was mainly caused by the fact that the existence of TiC particles and GNPS in braze, which could reduce the CTE of brazing alloy and alleviate the residual stresses at the interface of C/C and braze.

KW - Brazing

KW - Graphene nanoplatelets

KW - Mechanical property

KW - Microstructure

UR - http://www.scopus.com/inward/record.url?scp=84979628433&partnerID=8YFLogxK

U2 - 10.1016/j.matlet.2016.07.111

DO - 10.1016/j.matlet.2016.07.111

M3 - 文章

AN - SCOPUS:84979628433

SN - 0167-577X

VL - 183

SP - 232

EP - 235

JO - Materials Letters

JF - Materials Letters

ER -

Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this