TY - JOUR
T1 - Topological Optimisation Design of Nanofluid-Cooled Microchannel Heat Sink Using a Three-Layer Thermofluid Model for Electronics Cooling
AU - Zhang, Bin
AU - Lu, Xuanyan
AU - Qin, Zhigang
AU - Mo, Yibo
AU - Wang, Chenwei
AU - Hao, Sihui
AU - Song, Yixiang
AU - Xu, Jianyun
AU - Zhang, Zhifeng
AU - Long, Xu
N1 - Publisher Copyright:
Copyright © 2026 The Authors.
PY - 2026
Y1 - 2026
N2 - Nanofluid-cooled microchannel heat sinks (NCMHS) feature high heat dissipation efficiency and serve as a critical thermal management solution for electronic devices. This study employs a computationally efficient multi-layer modeling approach to conduct three-layer topological optimisation of the NCMHS. The flow and heat transfer within the NCMHS are described using a single-phase nanofluid-based thermofluid model that accounts for temperature-sensitive fluid properties. On this basis, a three-layer thermofluid model of the NCMHS is constructed by introducing assumptions regarding the velocity profile and an adaptive temperature profile in the thickness direction, together with the interlayer coupled heat flux derived from Fourier’s law. This model describes the conjugate heat transfer in the fluid channel and the heat conduction in the top and bottom plates in a two-dimensional manner, while comprehensively accounting for the influences of out-of-plane flow boundaries and heat transfer. Comparative validation against a full three-dimensional model demonstrates that the developed three-layer model achieves good numerical consistency. Based on this model, a three-layer topological optimisation framework for the NCMHS is further established by representing the channel layout with a fictitious density field. Numerical examples investigate the influences of temperature-sensitive fluid properties, pressure drop, heat source characteristics, and nanofluid properties on the optimized design of the NCMHS. The results elucidate that temperature-sensitive fluid properties significantly influence the optimized design. As the pressure drop increases, the optimized design tends to become more complex. In addition, reducing the nanoparticle volume fraction promotes the emergence of more branched channels in the optimized design.
AB - Nanofluid-cooled microchannel heat sinks (NCMHS) feature high heat dissipation efficiency and serve as a critical thermal management solution for electronic devices. This study employs a computationally efficient multi-layer modeling approach to conduct three-layer topological optimisation of the NCMHS. The flow and heat transfer within the NCMHS are described using a single-phase nanofluid-based thermofluid model that accounts for temperature-sensitive fluid properties. On this basis, a three-layer thermofluid model of the NCMHS is constructed by introducing assumptions regarding the velocity profile and an adaptive temperature profile in the thickness direction, together with the interlayer coupled heat flux derived from Fourier’s law. This model describes the conjugate heat transfer in the fluid channel and the heat conduction in the top and bottom plates in a two-dimensional manner, while comprehensively accounting for the influences of out-of-plane flow boundaries and heat transfer. Comparative validation against a full three-dimensional model demonstrates that the developed three-layer model achieves good numerical consistency. Based on this model, a three-layer topological optimisation framework for the NCMHS is further established by representing the channel layout with a fictitious density field. Numerical examples investigate the influences of temperature-sensitive fluid properties, pressure drop, heat source characteristics, and nanofluid properties on the optimized design of the NCMHS. The results elucidate that temperature-sensitive fluid properties significantly influence the optimized design. As the pressure drop increases, the optimized design tends to become more complex. In addition, reducing the nanoparticle volume fraction promotes the emergence of more branched channels in the optimized design.
KW - Topological optimisation
KW - convective heat transfer
KW - heat sinks
KW - nanofluid
KW - temperature-sensitive fluid properties
KW - three-layer thermofluid model
UR - https://www.scopus.com/pages/publications/105052015606
U2 - 10.32604/cmes.2026.086481
DO - 10.32604/cmes.2026.086481
M3 - 文章
AN - SCOPUS:105052015606
SN - 1526-1492
VL - 148
JO - CMES - Computer Modeling in Engineering and Sciences
JF - CMES - Computer Modeling in Engineering and Sciences
IS - 3
M1 - 17
ER -