跳到主要导航 跳到搜索 跳到主要内容

Study on relieving residual stress of friction stir welded joint of 2219 aluminum alloy using cold spraying

  • Northwestern Polytechnical University Xian
  • University of West Attica

科研成果: 期刊稿件 › 文章 › 同行评审

16 引用 (Scopus)

摘要

Friction stir welding is an advanced solid state welding technology, which has been widely used in aerospace and other fields. However, the large tensile residual stress developed in such joints will significantly affect mechanical properties. Cold spraying, as a new method to reduce residual stress of welded joints, can also improve the mechanical properties of the joints. In this paper, the correlation between microstructure and mechanical properties and residual stress of 2219 aluminum alloy joints prior and after coated with cold spraying was studied with experiments and numerical simulation for a 4 mm thick joint. The primary mechanism of stress relief of the joint was identified. Results show the refinement of grain size, with grain size decreasing from 2.1 μm in welded joints to 0.7 μm of cold sprayed joints, while high angle grain boundaries increase from 38.0% in the welded joint to 62.7% in cold sprayed ones. The ratio of recrystallized grains in the joints increases from 19.1% to 46.9%, while the joint strengthening phases θ″ and θ' increase, which increases tensile strength of the joints from 343 MPa to 398 MPa. The elongation is increased from 4.5% to 10.2%, and the average hardness of the joint is increased by 35 HV. The “ shot peening effect “ of cold spraying is found to be the primary factor to reduce residual stresses, while the “ heat flow effect “ has negligible effect on stress reduction. The mechanism of reducing residual stresses is provided by the macroscopic stress-strain theory and the microscopic dislocation theory.

源语言英语
期刊论文编号113417
期刊Materials Characterization
卷206
DOI
出版状态已出版 - 12月 2023

学术指纹

探究 'Study on relieving residual stress of friction stir welded joint of 2219 aluminum alloy using cold spraying' 的科研主题。它们共同构成独一无二的学术指纹。

引用此