Structures and properties of P/M compacts after laser bulk sintering

Yulong Li; Qingfeng Guan; Zuoxing Guo; Jiandong Hu; Hongying Wang; Yufeng Wang

Structures and properties of P/M compacts after laser bulk sintering

Yulong Li
, Qingfeng Guan
, Zuoxing Guo
, Jiandong Hu
, Hongying Wang
, Yufeng Wang

Jilin University

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

A carbon dioxide continuous laser was used to sinter copper and iron based powder green compacts with an effective thickness of equal or less than 10 mm by bulk radiation. The microstructure, porosity, hardness, impact toughness, tensile strength and wear resistance of the sintered alloys were determined. The results show that the structures and properties of the laser bulk sintered compacts are superior to that of the conventional sintering.

源语言	英语
页（从-至）	192-195
页数	4
期刊	Fenmo Yejin Jishu/Powder Metallurgy Technology
卷	13
期	3
出版状态	已出版 - 8月 1995
已对外发布	是

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{c3ee2cbab739406ab9e2d14dbf371ca1,

title = "Structures and properties of P/M compacts after laser bulk sintering",

abstract = "A carbon dioxide continuous laser was used to sinter copper and iron based powder green compacts with an effective thickness of equal or less than 10 mm by bulk radiation. The microstructure, porosity, hardness, impact toughness, tensile strength and wear resistance of the sintered alloys were determined. The results show that the structures and properties of the laser bulk sintered compacts are superior to that of the conventional sintering.",

author = "Yulong Li and Qingfeng Guan and Zuoxing Guo and Jiandong Hu and Hongying Wang and Yufeng Wang",

year = "1995",

month = aug,

language = "英语",

volume = "13",

pages = "192--195",

journal = "Fenmo Yejin Jishu/Powder Metallurgy Technology",

issn = "1001-3784",

publisher = "University of Science and Technology Beijing",

number = "3",

}

TY - JOUR

T1 - Structures and properties of P/M compacts after laser bulk sintering

AU - Li, Yulong

AU - Guan, Qingfeng

AU - Guo, Zuoxing

AU - Hu, Jiandong

AU - Wang, Hongying

AU - Wang, Yufeng

PY - 1995/8

Y1 - 1995/8

N2 - A carbon dioxide continuous laser was used to sinter copper and iron based powder green compacts with an effective thickness of equal or less than 10 mm by bulk radiation. The microstructure, porosity, hardness, impact toughness, tensile strength and wear resistance of the sintered alloys were determined. The results show that the structures and properties of the laser bulk sintered compacts are superior to that of the conventional sintering.

AB - A carbon dioxide continuous laser was used to sinter copper and iron based powder green compacts with an effective thickness of equal or less than 10 mm by bulk radiation. The microstructure, porosity, hardness, impact toughness, tensile strength and wear resistance of the sintered alloys were determined. The results show that the structures and properties of the laser bulk sintered compacts are superior to that of the conventional sintering.

UR - https://www.scopus.com/pages/publications/0029350692

M3 - 文章

AN - SCOPUS:0029350692

SN - 1001-3784

VL - 13

SP - 192

EP - 195

JO - Fenmo Yejin Jishu/Powder Metallurgy Technology

JF - Fenmo Yejin Jishu/Powder Metallurgy Technology

IS - 3

ER -

Structures and properties of P/M compacts after laser bulk sintering

摘要

其它文件与链接

指纹

引用此