跳到主要导航 跳到搜索 跳到主要内容

Structural Electromagnetic Absorber Based on MoS2/PyC-Al2O3 Ceramic Metamaterials

  • Xingmin Liu
  • , Heqiang Liu
  • , Hongjing Wu
  • , Qian Zhou
  • , Hongsheng Liang
  • , Guoqiang Liu
  • , Wenyan Duan
  • , Yue Gu
  • , Chengying Xu
  • , Nahum Travitzky
  • , Paolo Colombo
  • , Ralf Riedel
  • Northwestern Polytechnical University Xian
  • Technische Universität Darmstadt
  • Xi'an Institute of Posts and Telecommunications
  • CAS - Technology and Engineering Center for Space Utilization
  • North Carolina State University
  • Friedrich-Alexander University Erlangen-Nürnberg
  • University of Padua

科研成果: 期刊稿件 › 文章 › 同行评审

57 引用 (Scopus)

摘要

Limited by the types of suitable absorbents as well as the challenges in engineering the nanostructures (e.g., defects, dipoles, and hetero-interface) using state-of-the-art additive manufacturing (AM) techniques, the electromagnetic (EM) wave absorption performance of the current ceramic-based materials is still not satisfying. Moreover, because of the high residual porosity and the possible formation of cracks during sintering or pyrolysis, AM-formed ceramic components may in many cases exhibit low mechanical strength. In this work, semiconductive MoS2 and conductive PyC modified Al2O3 (MoS2/PyC-Al2O3) ceramic-based structural EM metamaterials are developed by innovatively harnessing AM, precursor infiltration and pyrolysis (PIP), and hydrothermal methods. Three different meta-structures are successfully created, and the ceramic-based nanocomposite benefit from its optimization of EM parameters. Ultra-broad effective absorption bandwidth (EAB) of 35 GHz is achieved by establishment of multi-loss mechanism via nanostructure engineering and fabrication of meta-structures via AM. Due to the strengthening by the PyC phase, the bending strength of the resulting ceramics can reach ≈327 MPa, which is the highest value measured on 3D-printed ceramics of this type that has been reported so far. For the first time, the positive effect deriving from the engineering of the microscopic nano/microstructure and of the macroscopic meta-structure of the absorber on the permittivity and EM absorption performance is proposed. Integration of outstanding mechanical strength and ultra-broad EAB is innovatively realized through a multi-scale design route. This work provides new insights for the design of advanced ceramic-based metamaterials with outstanding performance under extreme environment.

源语言英语
期刊论文编号2300664
期刊Small
卷19
期33
DOI
出版状态已出版 - 16 8月 2023

学术指纹

探究 'Structural Electromagnetic Absorber Based on MoS2/PyC-Al2O3 Ceramic Metamaterials' 的科研主题。它们共同构成独一无二的学术指纹。

引用此