跳到主要导航 跳到搜索 跳到主要内容

Strength enhancement through modifying α phase of Ti-6Al-4V alloy via frequency-tracking ultrasound assisted wire-arc additive manufacturing

  • Rong Wang
  • , Wenhua Wu
  • , Jinzhao Wang
  • , Jianyuan Wang
  • , Wei Zhai
  • Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

Titanium alloys fabricated by wire-arc additive manufacturing (WAAM) usually suffer from coarse β columnar grains and uncontrollable α phase morphology, which limit the further improvement of mechanical properties. To address this, we applied a self-designed frequency-tracking ultrasound during WAAM and investigated the microstructure evolution and strengthening mechanisms through experiments and numerical simulations. Compared with frequency-fixing ultrasound, the frequency-tracking ultrasound maintained a resonance state with the increase of deposition height via in-situ load matching, thereby generating a more stable vibration at the solid-liquid interface. This effectively refined β columnar grains by promoting β phase nucleation through cavitation-induced undercooling. In contrast to the refined α precipitates within the β grain interior (GI), the grain boundary (GB) α phase became coarsened and continuous. This variation originated from the suppressed Al depletion and V segregation near the β phase growth front by acoustic streaming, which respectively raised the nucleation temperature of GB-α and lowered that of GI-α. The ultrasound-treated alloy achieved a yield strength of 1028 MPa and an ultimate tensile strength of 1114 MPa, representing increases of 65% and 40% over conventional WAAM. This improvement primarily arose from the continuous and coarsened GB-α phase, which resisted deformation and effectively hindered dislocation slip. These findings clarified the critical role of ultrasound in controlling β and α phase evolution during Ti-6Al-4V WAAM and offered a promising route for producing high-performance titanium alloys.

源语言英语
期刊论文编号190834
期刊Journal of Alloys and Compounds
卷1080
DOI
出版状态已出版 - 25 9月 2026

学术指纹

探究 'Strength enhancement through modifying α phase of Ti-6Al-4V alloy via frequency-tracking ultrasound assisted wire-arc additive manufacturing' 的科研主题。它们共同构成独一无二的学术指纹。

引用此