Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites

Bo Li; Hejun Li; Xiyuan Yao; Xiaofei Zhu; Ningkun Liu

doi:10.1016/j.apsusc.2022.152617

Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites

Bo Li
, Hejun Li
, Xiyuan Yao
, Xiaofei Zhu
, Ningkun Liu

材料学院

Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

58 引用（Scopus）

摘要

To improve the ablation resistance of sharp leading edge (SLE) C/C composites, the ZrC nanowires reinforced ZrC coating (ZrC-ZrC_nws) was prepared by two-step CVD method. The preparation of ZrC nanowires and the microstructure, bonding strength, as well as ablation resistance of the ZrC-ZrC_nws coating were studied. After the severe ablation, the SLE sample with ZrC-ZrC_nws coating presented an excellent ablation resistance with the mass and linear ablation rates of only 0.59 ± 0.06 mg/s and −0.92 ± 0.09 μm/s, respectively. Such good ablation resistance was attributed to the incorporation of ZrC nanowires, which can inhibit the cracking of coating and form ZrO₂ rod-like structures after oxidation, supporting the oxide layer to resist flame scouring.

源语言	英语
文章编号	152617
期刊	Applied Surface Science
卷	584
DOI	https://doi.org/10.1016/j.apsusc.2022.152617
出版状态	已出版 - 15 5月 2022

访问文件

10.1016/j.apsusc.2022.152617

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{fd93372eda1e41acb46b23f6e0034b47,

title = "Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites",

abstract = "To improve the ablation resistance of sharp leading edge (SLE) C/C composites, the ZrC nanowires reinforced ZrC coating (ZrC-ZrCnws) was prepared by two-step CVD method. The preparation of ZrC nanowires and the microstructure, bonding strength, as well as ablation resistance of the ZrC-ZrCnws coating were studied. After the severe ablation, the SLE sample with ZrC-ZrCnws coating presented an excellent ablation resistance with the mass and linear ablation rates of only 0.59 ± 0.06 mg/s and −0.92 ± 0.09 μm/s, respectively. Such good ablation resistance was attributed to the incorporation of ZrC nanowires, which can inhibit the cracking of coating and form ZrO2 rod-like structures after oxidation, supporting the oxide layer to resist flame scouring.",

keywords = "Ablation resistance, Chemical vapor deposition, Coating, Sharp leading edge, ZrC nanowire",

author = "Bo Li and Hejun Li and Xiyuan Yao and Xiaofei Zhu and Ningkun Liu",

note = "Publisher Copyright: {\textcopyright} 2022 Elsevier B.V.",

year = "2022",

month = may,

day = "15",

doi = "10.1016/j.apsusc.2022.152617",

language = "英语",

volume = "584",

journal = "Applied Surface Science",

issn = "0169-4332",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites

AU - Li, Bo

AU - Li, Hejun

AU - Yao, Xiyuan

AU - Zhu, Xiaofei

AU - Liu, Ningkun

PY - 2022/5/15

Y1 - 2022/5/15

N2 - To improve the ablation resistance of sharp leading edge (SLE) C/C composites, the ZrC nanowires reinforced ZrC coating (ZrC-ZrCnws) was prepared by two-step CVD method. The preparation of ZrC nanowires and the microstructure, bonding strength, as well as ablation resistance of the ZrC-ZrCnws coating were studied. After the severe ablation, the SLE sample with ZrC-ZrCnws coating presented an excellent ablation resistance with the mass and linear ablation rates of only 0.59 ± 0.06 mg/s and −0.92 ± 0.09 μm/s, respectively. Such good ablation resistance was attributed to the incorporation of ZrC nanowires, which can inhibit the cracking of coating and form ZrO2 rod-like structures after oxidation, supporting the oxide layer to resist flame scouring.

AB - To improve the ablation resistance of sharp leading edge (SLE) C/C composites, the ZrC nanowires reinforced ZrC coating (ZrC-ZrCnws) was prepared by two-step CVD method. The preparation of ZrC nanowires and the microstructure, bonding strength, as well as ablation resistance of the ZrC-ZrCnws coating were studied. After the severe ablation, the SLE sample with ZrC-ZrCnws coating presented an excellent ablation resistance with the mass and linear ablation rates of only 0.59 ± 0.06 mg/s and −0.92 ± 0.09 μm/s, respectively. Such good ablation resistance was attributed to the incorporation of ZrC nanowires, which can inhibit the cracking of coating and form ZrO2 rod-like structures after oxidation, supporting the oxide layer to resist flame scouring.

KW - Ablation resistance

KW - Chemical vapor deposition

KW - Coating

KW - Sharp leading edge

KW - ZrC nanowire

UR - https://www.scopus.com/pages/publications/85123753570

U2 - 10.1016/j.apsusc.2022.152617

DO - 10.1016/j.apsusc.2022.152617

M3 - 文章

AN - SCOPUS:85123753570

SN - 0169-4332

VL - 584

JO - Applied Surface Science

JF - Applied Surface Science

M1 - 152617

ER -

Preparation and ablation resistance of ZrC nanowires-reinforced CVD-ZrC coating on sharp leading edge C/C composites

摘要

访问文件

其它文件与链接

指纹

引用此