跳到主要导航 跳到搜索 跳到主要内容

Orthotropic elastic behaviors and yield strength of fused deposition modeling materials: Theory and experiments

  • Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

34 引用 (Scopus)

摘要

This work is devoted to study the mechanical behaviors of polylactic acid (PLA) materials from additive manufacturing, and an orthotropic model is established to predict the mechanical properties under arbitrary printing orientation. Firstly, the morphology of PLA material is analyzed by using scanning electron microscopy, from which the orthotropic behavior of PLA material is obtained. Three printing planes are adopted, and on each printing plane different printing angles may be selected. The mechanical parameters, including Young's modulus, yielding stress, and Poisson's ratio, for material under different printing directions are determined via quasi-static experiments. Secondly, the orthotropic constitutive model of PLA materials under different printing angles is thus obtained, and the prediction method of orthotropic mechanical properties is built based on the coordinate transformation matrix, where the orthotropic coordinate transformation matrix is acquired by attitude angles (i.e., Euler angle, the rotation angle of the local coordinate system relative to the global coordinate system). Finally, the theoretical prediction method was verified, and high-quality printing methods were recommended. In addition, the obtained results of the model show that: for PLA material, the orthotropic hypothesis model is superior to the transverse isotropic hypothesis one. This present method is not only suitable for predicting the constitutive model of printed specimens in any direction but also for other materials of fused deposition modeling.

源语言英语
期刊论文编号106520
期刊Polymer Testing
卷87
DOI
出版状态已出版 - 7月 2020

学术指纹

探究 'Orthotropic elastic behaviors and yield strength of fused deposition modeling materials: Theory and experiments' 的科研主题。它们共同构成独一无二的学术指纹。

引用此