TY - JOUR
T1 - Optical floating zone melting of B4C-TiB2 eutectic composites
T2 - Microstructure, defects and their correlations with nano-mechanical properties
AU - Ren, Qun
AU - Su, Haijun
AU - Yang, Xirong
AU - Cui, Chunjuan
AU - Liu, Xiaoyan
N1 - Publisher Copyright:
© 2026 Elsevier B.V.
PY - 2026/9/25
Y1 - 2026/9/25
N2 - B4C-TiB2 eutectic composites were fabricated via the optical floating zone melting (OFZM). The quality, microstructures, defects features and microstructure-hardness correlation were investigated based on analysis of micro-CT, SEM, KAM, TEM and nano-indentation. It is shown that TiB2 phase exhibits discontinuous elongated morphology and lamellar/rod-like eutectic transformation generally formed near the coarse B4C matrix, especially near the eutectic colony. Three categories of rod-like structures were identified with different formation mechanism. Cracks initiate at edges and propagate along the lamellar alignment within the B4C matrix. Twins and dislocations are observed in the B4C matrix, which act as the plastic deformation accommodation mechanisms during coupled growth, and can effectively enhance the hardness. The KAM results show a high dislocation density near the eutectic interface, especially on the B4C side, indicating enhanced local hardness. Nanoindentation array tests reveal a strong dependence of hardness on microstructural features. The average hardness is 32 GPa with 32.5 GPa for the B4C matrix, 29.4 GPa for the TiB2 phase. The hardness near the interface reaches 31 GPa on the B4C side and 32.6 GPa on the TiB2 side. Dislocations and twins in the B4C matrix and at eutectic interfaces serve as an important mechanism for hardness enhancement.
AB - B4C-TiB2 eutectic composites were fabricated via the optical floating zone melting (OFZM). The quality, microstructures, defects features and microstructure-hardness correlation were investigated based on analysis of micro-CT, SEM, KAM, TEM and nano-indentation. It is shown that TiB2 phase exhibits discontinuous elongated morphology and lamellar/rod-like eutectic transformation generally formed near the coarse B4C matrix, especially near the eutectic colony. Three categories of rod-like structures were identified with different formation mechanism. Cracks initiate at edges and propagate along the lamellar alignment within the B4C matrix. Twins and dislocations are observed in the B4C matrix, which act as the plastic deformation accommodation mechanisms during coupled growth, and can effectively enhance the hardness. The KAM results show a high dislocation density near the eutectic interface, especially on the B4C side, indicating enhanced local hardness. Nanoindentation array tests reveal a strong dependence of hardness on microstructural features. The average hardness is 32 GPa with 32.5 GPa for the B4C matrix, 29.4 GPa for the TiB2 phase. The hardness near the interface reaches 31 GPa on the B4C side and 32.6 GPa on the TiB2 side. Dislocations and twins in the B4C matrix and at eutectic interfaces serve as an important mechanism for hardness enhancement.
KW - Defects
KW - Eutectic composites
KW - Hardness
KW - Microstructures
KW - Optical floating zone melting
UR - https://www.scopus.com/pages/publications/105048812770
U2 - 10.1016/j.jallcom.2026.190582
DO - 10.1016/j.jallcom.2026.190582
M3 - 文章
AN - SCOPUS:105048812770
SN - 0925-8388
VL - 1080
JO - Journal of Alloys and Compounds
JF - Journal of Alloys and Compounds
M1 - 190582
ER -