TY - JOUR
T1 - Numerical studies on interactions between a centrifugal compressor and the back-propagated pressure waves originated from a pulse detonation combustor
AU - Jie, Lu
AU - lingyi, Wang
AU - Hao, Zhang
AU - Longxi, Zheng
AU - Changxin, Peng
N1 - Publisher Copyright:
© IMechE 2022.
PY - 2023/2
Y1 - 2023/2
N2 - In order to investigate the influence of the back-propagated pressure waves originated from a pulse detonation combustor on the operating characteristics of the compressor in the pulse detonation turbine engine, a model consist of a centrifugal compressor and an isolation section which was usually utilized to decrease the peak value of the back-propagated pressure waves was set up. Numerical simulations were carried out to study the interactions between the centrifugal compressor and the back-propagated pressure waves under different operating conditions. The matching characteristics of the compressor under the influence of the back-propagated pressure waves were analyzed in a detonation cycle. The results showed that the back-propagated pressure waves would push the shock wave in the isolator towards the throat position, but the shock wave did not pass through the throat for the compressor corrected speed of n = 100% and n = 105%. For these two cases, the back-propagated pressure waves were completely isolated and the operating characteristics of the compressor were the same as those under the steady outlet conditions. For the corrected speed of n = 50% and n = 90%, the shock wave in the isolator section was pushed out of the throat and the supersonic flow in the isolator section was destroyed under the influence of the back-propagated pressure waves. The back-propagated pressure waves would propagate upstream into the compressor. Consequently, the instantaneous mass flow rate and the torque acting on the centrifugal impeller was decreased. The work required by the compressor was also reduced. The equivalent isentropic efficiency of the compressor was decreased. The separation or backflow in the compressor caused by the back-propagated pressure waves would results in an equivalent isentropic efficiency loss of 3.2% points for the case of n = 90% and 15.6% points for the case of n = 50%.
AB - In order to investigate the influence of the back-propagated pressure waves originated from a pulse detonation combustor on the operating characteristics of the compressor in the pulse detonation turbine engine, a model consist of a centrifugal compressor and an isolation section which was usually utilized to decrease the peak value of the back-propagated pressure waves was set up. Numerical simulations were carried out to study the interactions between the centrifugal compressor and the back-propagated pressure waves under different operating conditions. The matching characteristics of the compressor under the influence of the back-propagated pressure waves were analyzed in a detonation cycle. The results showed that the back-propagated pressure waves would push the shock wave in the isolator towards the throat position, but the shock wave did not pass through the throat for the compressor corrected speed of n = 100% and n = 105%. For these two cases, the back-propagated pressure waves were completely isolated and the operating characteristics of the compressor were the same as those under the steady outlet conditions. For the corrected speed of n = 50% and n = 90%, the shock wave in the isolator section was pushed out of the throat and the supersonic flow in the isolator section was destroyed under the influence of the back-propagated pressure waves. The back-propagated pressure waves would propagate upstream into the compressor. Consequently, the instantaneous mass flow rate and the torque acting on the centrifugal impeller was decreased. The work required by the compressor was also reduced. The equivalent isentropic efficiency of the compressor was decreased. The separation or backflow in the compressor caused by the back-propagated pressure waves would results in an equivalent isentropic efficiency loss of 3.2% points for the case of n = 90% and 15.6% points for the case of n = 50%.
KW - back-propagated pressure waves
KW - Centrifugal compressor
KW - operating characteristics
KW - pulse detonation combustor
UR - https://www.scopus.com/pages/publications/85131012092
U2 - 10.1177/09576509221103972
DO - 10.1177/09576509221103972
M3 - 文章
AN - SCOPUS:85131012092
SN - 0957-6509
VL - 237
SP - 153
EP - 162
JO - Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
JF - Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
IS - 1
ER -