TY - JOUR
T1 - Numerical simulation of droplet deposition and film evolution in an aero engine bearing chamber using an improved DPM-VOF method
AU - Wu, Nan
AU - Hu, Jianping
AU - Lyu, Yaguo
AU - Liu, Zhengang
AU - Liu, Zhenxia
N1 - Publisher Copyright:
© 2026 Published by Elsevier B.V.
PY - 2026/12
Y1 - 2026/12
N2 - The oil-air two-phase flow and heat transfer characteristics within aero-engine bearing chambers are critical factors influencing the operational reliability and service life of both the lubrication system and the engine. To address the complex flow involving the coexistence of discrete droplets and a continuous liquid film in bearing chambers, this paper proposes a coupled Discrete Phase Model and Volume of Fluid (DPM-VOF) method to perform simulation of the unsteady droplet deposition and film spreading process. The novelty of the present work lies in the introduction of the dimensionless film thickness, the Weber number, and the Laplace number for bearing chamber conditions, thereby establishing comprehensive criteria covering stick, rebound, and splash for high Weber number oil droplet impacts. Based on these criteria, the modified collision model accurately captures key interfacial dynamics such as droplet-wall impacts and droplet-film interactions. This study systematically evaluates the accuracy of the improved DPM-VOF method in capturing the evolution of oil films on bearing chamber walls and thoroughly reveals the influence of rotational speed on droplet motion and oil film flow characteristics. Comparative analysis with experimental data demonstrates that the improved DPM-VOF method achieves satisfactory accuracy, with an average oil film thickness error of 5.6%, while consuming only 53.91% of the computational time required by the Coupled Level Set and Volume of Fluid (CLSVOF) method. The findings indicate that increasing rotational speed significantly enhances droplet migration efficiency, with the droplet number exhibiting a multi-peak decay distribution. Additionally, although higher rotational speeds contribute to improving the circumferential and axial uniformity of the oil film coverage on the wall, exceeding a certain threshold accelerates droplet detachment at the wave crests. The improved DPM-VOF method shows promising potential under the current operating conditions, emerging as an effective analysis tool for bearing chamber optimization design.
AB - The oil-air two-phase flow and heat transfer characteristics within aero-engine bearing chambers are critical factors influencing the operational reliability and service life of both the lubrication system and the engine. To address the complex flow involving the coexistence of discrete droplets and a continuous liquid film in bearing chambers, this paper proposes a coupled Discrete Phase Model and Volume of Fluid (DPM-VOF) method to perform simulation of the unsteady droplet deposition and film spreading process. The novelty of the present work lies in the introduction of the dimensionless film thickness, the Weber number, and the Laplace number for bearing chamber conditions, thereby establishing comprehensive criteria covering stick, rebound, and splash for high Weber number oil droplet impacts. Based on these criteria, the modified collision model accurately captures key interfacial dynamics such as droplet-wall impacts and droplet-film interactions. This study systematically evaluates the accuracy of the improved DPM-VOF method in capturing the evolution of oil films on bearing chamber walls and thoroughly reveals the influence of rotational speed on droplet motion and oil film flow characteristics. Comparative analysis with experimental data demonstrates that the improved DPM-VOF method achieves satisfactory accuracy, with an average oil film thickness error of 5.6%, while consuming only 53.91% of the computational time required by the Coupled Level Set and Volume of Fluid (CLSVOF) method. The findings indicate that increasing rotational speed significantly enhances droplet migration efficiency, with the droplet number exhibiting a multi-peak decay distribution. Additionally, although higher rotational speeds contribute to improving the circumferential and axial uniformity of the oil film coverage on the wall, exceeding a certain threshold accelerates droplet detachment at the wave crests. The improved DPM-VOF method shows promising potential under the current operating conditions, emerging as an effective analysis tool for bearing chamber optimization design.
KW - Accumulation
KW - Bearing chamber
KW - Continuous phase
KW - DPM-VOF method
KW - Discrete phase
UR - https://www.scopus.com/pages/publications/105052046833
U2 - 10.1016/j.simpat.2026.103357
DO - 10.1016/j.simpat.2026.103357
M3 - 文章
AN - SCOPUS:105052046833
SN - 1569-190X
VL - 153
JO - Simulation Modelling Practice and Theory
JF - Simulation Modelling Practice and Theory
M1 - 103357
ER -