TY - JOUR
T1 - Microstructure Characterization and Mechanical Properties of Dissimilar Al/Al-Li Alloy T-Joints Welded by Friction Stir Welding
AU - Han, Yanjie
AU - Zuo, Duquan
AU - Xu, Tianyu
AU - Ma, Guoling
AU - Feng, Shilin
AU - Fu, Haoran
AU - Cao, Zengqiang
AU - Li, Wenya
N1 - Publisher Copyright:
© 2025 by the authors.
PY - 2025/9
Y1 - 2025/9
N2 - This paper investigates the influence of the internal concave surface structure of the stirring tool and welding parameters on the microstructure and mechanical properties of the T-joint. The analysis reveals that compared to the inner concave surface without spirals, T-joints welded by inner concave surfaces with spirals exhibit fewer welding defects. Meanwhile, the microscopic results showed that there is a welding juncture zone between the thermomechanical affected zone and the nugget zone, and a large number of θ’, T1, and η’ phases precipitate in the nugget zone of the joint, which improves its strength and hardness. When welding speed v, rotational speed w and insertion depth h are 60 mm/min, 350 rpm, and 0.21 mm, respectively, the yield strength, the tensile strength, and the elongation of the T-joint reach their maximum values (352 MPa, 408 MPa and 5%), and the tensile strength represents 68.0% and 71.6% of the base materials, respectively. The fracture mechanism of the joint is a mode of ductile fracture. Furthermore, the T-joint exhibits a “W” and “Z” distribution pattern on both sides of the weld centerline B and A, respectively.
AB - This paper investigates the influence of the internal concave surface structure of the stirring tool and welding parameters on the microstructure and mechanical properties of the T-joint. The analysis reveals that compared to the inner concave surface without spirals, T-joints welded by inner concave surfaces with spirals exhibit fewer welding defects. Meanwhile, the microscopic results showed that there is a welding juncture zone between the thermomechanical affected zone and the nugget zone, and a large number of θ’, T1, and η’ phases precipitate in the nugget zone of the joint, which improves its strength and hardness. When welding speed v, rotational speed w and insertion depth h are 60 mm/min, 350 rpm, and 0.21 mm, respectively, the yield strength, the tensile strength, and the elongation of the T-joint reach their maximum values (352 MPa, 408 MPa and 5%), and the tensile strength represents 68.0% and 71.6% of the base materials, respectively. The fracture mechanism of the joint is a mode of ductile fracture. Furthermore, the T-joint exhibits a “W” and “Z” distribution pattern on both sides of the weld centerline B and A, respectively.
KW - T-joints
KW - dissimilar alloys
KW - friction stir welding
KW - organization performance
KW - shoulder structure
UR - https://www.scopus.com/pages/publications/105017094743
U2 - 10.3390/machines13090852
DO - 10.3390/machines13090852
M3 - 文章
AN - SCOPUS:105017094743
SN - 2075-1702
VL - 13
JO - Machines
JF - Machines
IS - 9
M1 - 852
ER -