TY - JOUR
T1 - Microstructure and mechanical properties of hot-extruded Al–Ce–Mg–Si alloy fabricated from degraded laser powder bed fusion powders
AU - Feng, Ting
AU - Ju, Jiang
AU - Yao, Tong
AU - Peng, Peng
AU - Wang, Yufei
AU - Gao, Haiyan
AU - Wang, Jun
N1 - Publisher Copyright:
© 2026 The Authors.
PY - 2026/11/1
Y1 - 2026/11/1
N2 - Upcycling degraded alloy powders from laser powder bed fusion (LPBF) through alternative solid-state processing routes is important for sustainable additive manufacturing. In this study, an Al–10.0Ce–0.68Mg–0.51Si (wt.%) alloy was fabricated from powders recovered from the overflow bin of an LPBF system through spark plasma sintering followed by hot extrusion. The alloy exhibits a deformed microstructure dominated by coarse fibrous grains containing a high density of retained substructures (dislocation walls and subgrain boundaries), along with a limited fraction of fine recrystallized grains. The retention of these substructures is associated with strong interactions between the high-volume-fraction intermetallic particles, dislocations, and subgrain boundaries. At room temperature, the alloy exhibits a yield strength (YS) of ∼133 MPa, an ultimate tensile strength of ∼230 MPa, and an elongation to fracture (EF) of ∼22%. The YS arises from the combined effects of grain-boundary and dislocation strengthening, with additional particle-related contributions, while the heterogeneous grain structure and retained substructures sustain strain hardening and delay strain localization. At 200 °C, the alloy retains ∼93% of its room-temperature YS, accompanied by an increase in EF to ∼50%. This elevated-temperature response is associated with particle-assisted boundary pinning, matrix softening, and coordinated deformation promoted by crystallographic reorientation. This work demonstrates an alternative solid-state route for upcycling recovered LPBF powders and clarifies the roles of intermetallic particles and deformation-induced substructures in regulating the microstructure and mechanical behavior of Al–Ce-based alloys.
AB - Upcycling degraded alloy powders from laser powder bed fusion (LPBF) through alternative solid-state processing routes is important for sustainable additive manufacturing. In this study, an Al–10.0Ce–0.68Mg–0.51Si (wt.%) alloy was fabricated from powders recovered from the overflow bin of an LPBF system through spark plasma sintering followed by hot extrusion. The alloy exhibits a deformed microstructure dominated by coarse fibrous grains containing a high density of retained substructures (dislocation walls and subgrain boundaries), along with a limited fraction of fine recrystallized grains. The retention of these substructures is associated with strong interactions between the high-volume-fraction intermetallic particles, dislocations, and subgrain boundaries. At room temperature, the alloy exhibits a yield strength (YS) of ∼133 MPa, an ultimate tensile strength of ∼230 MPa, and an elongation to fracture (EF) of ∼22%. The YS arises from the combined effects of grain-boundary and dislocation strengthening, with additional particle-related contributions, while the heterogeneous grain structure and retained substructures sustain strain hardening and delay strain localization. At 200 °C, the alloy retains ∼93% of its room-temperature YS, accompanied by an increase in EF to ∼50%. This elevated-temperature response is associated with particle-assisted boundary pinning, matrix softening, and coordinated deformation promoted by crystallographic reorientation. This work demonstrates an alternative solid-state route for upcycling recovered LPBF powders and clarifies the roles of intermetallic particles and deformation-induced substructures in regulating the microstructure and mechanical behavior of Al–Ce-based alloys.
KW - Al-Ce-Mg-Si alloy
KW - High-temperature performance
KW - Mechanical properties
KW - Powder hot extrusion
UR - https://www.scopus.com/pages/publications/105051661637
U2 - 10.1016/j.jmrt.2026.09.232
DO - 10.1016/j.jmrt.2026.09.232
M3 - 文章
AN - SCOPUS:105051661637
SN - 2238-7854
VL - 45
SP - 2350
EP - 2362
JO - Journal of Materials Research and Technology
JF - Journal of Materials Research and Technology
ER -