跳到主要导航 跳到搜索 跳到主要内容

Influence of sintering parameters on quasi-static and dynamic mechanical behavior of 3D-printed ceramics

  • Qian Sun
  • , Zeeshan Ali
  • , Jianhao Man
  • , Shuai Li
  • , Mengke Li
  • , Chong Gao
  • , Xiaojun Tan
  • , Bo Cao
  • Northwestern Polytechnical University Xian
  • Kunming University of Science and Technology
  • Beihang University
  • Taicang

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

Ceramic composites are valued for their high hardness, but their inherent brittleness makes their mechanical performance highly sensitive to processing routes. While additive manufacturing techniques such as direct ink writing (DIW) and digital light processing (DLP) enable the fabrication of complex ceramic geometries, the mechanical response of 3D-printed ceramics across different strain rates remains insufficiently understood, particularly regarding the role of sintering parameters. In this study, SiO₂- and Al₂O₃-based ceramics were fabricated via DIW, with DLP-printed Al₂O₃ included for comparison, and systematically sintered at temperatures of 1050, 1150, and 1250 °C with holding times of 0–2 h. Quasi-static and impact compressive tests were conducted to evaluate their mechanical behavior, while fracture morphologies were examined by scanning electron microscopy to elucidate deformation mechanisms. The results demonstrate that increasing sintering temperature and duration significantly improves compressive strength, with the optimal performance achieved at 1250 °C for 2 h. All materials exhibit pronounced strain-rate sensitivity, showing higher peak strength and strain under impact loading than under quasi-static conditions, with Al₂O₃ displaying greater sensitivity to sintering variations than SiO₂. Microstructural analysis reveals that higher sintering temperatures promote particle neck growth and the transition from open to closed porosity, enhancing the effective load-bearing area and reducing stress concentration. In addition, DLP-fabricated Al₂O₃ exhibits higher densification and superior dynamic compressive performance compared with DIW specimens.

源语言英语
期刊Journal of the Australian Ceramic Society
DOI
出版状态已接受/待刊 - 2026
已对外发布是

学术指纹

探究 'Influence of sintering parameters on quasi-static and dynamic mechanical behavior of 3D-printed ceramics' 的科研主题。它们共同构成独一无二的学术指纹。

引用此