Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al                         2                         O                         3                         -mullite multi-coatings for carbon/carbon composites

Jian Feng Huang; He Jun Li; Xie Rong Zeng; Xin Bo Xiong; Ke Zhi Li

doi:10.1016/j.apsusc.2005.07.004

Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites

Jian Feng Huang
, He Jun Li
, Xie Rong Zeng
, Xin Bo Xiong
, Ke Zhi Li

材料学院

Northwestern Polytechnical University Xian
Shaanxi University of Science and Technology
Shenzhen University

科研成果: 期刊稿件 › 文章 › 同行评审

21 引用（Scopus）

摘要

Oxidation protective SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon (C/C) composites were prepared with a two-step pack cementation process. The influence of preparation temperature and SiO ₂ /Al ₂ O ₃ ratio of the pack powder on the phase, microstructure and oxidation resistance of the multi-coatings were investigated. It showed that the multi-coatings that contained mullite could be produced at 1700-1800 °C. A denser coating surface was acquired with the decrease of SiO ₂ /Al ₂ O ₃ ratio in the pack chemistries while a little damnification to the interface of the coating and C/C substrate. The as-prepared coating could effectively protect C/C composites from oxidation at 1600 °C for 81 h.

源语言	英语
页（从-至）	4244-4249
页数	6
期刊	Applied Surface Science
卷	252
期	12
DOI	https://doi.org/10.1016/j.apsusc.2005.07.004
出版状态	已出版 - 15 4月 2006

访问文件

10.1016/j.apsusc.2005.07.004

其它文件与链接

链接到 Scopus 的出版物

引用此

Huang, J. F., Li, H. J., Zeng, X. R., Xiong, X. B., & Li, K. Z. (2006). Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites Applied Surface Science, 252(12), 4244-4249. https://doi.org/10.1016/j.apsusc.2005.07.004

Huang, Jian Feng ; Li, He Jun ; Zeng, Xie Rong 等. / Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites 在: Applied Surface Science. 2006 ; 卷 252, 号码 12. 页码 4244-4249.

@article{7b6956a0b4104b0faf3bd4705a034ad8,

title = " Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon composites ",

abstract = " Oxidation protective SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon (C/C) composites were prepared with a two-step pack cementation process. The influence of preparation temperature and SiO 2 /Al 2 O 3 ratio of the pack powder on the phase, microstructure and oxidation resistance of the multi-coatings were investigated. It showed that the multi-coatings that contained mullite could be produced at 1700-1800 °C. A denser coating surface was acquired with the decrease of SiO 2 /Al 2 O 3 ratio in the pack chemistries while a little damnification to the interface of the coating and C/C substrate. The as-prepared coating could effectively protect C/C composites from oxidation at 1600 °C for 81 h.",

keywords = "Carbon/carbon composites, Coating, Diffraction, Oxidation, Reflection, Solid surfaces and solid interfaces, Surface structure, morphology, roughness and topography, X-ray scattering",

author = "Huang, \{Jian Feng\} and Li, \{He Jun\} and Zeng, \{Xie Rong\} and Xiong, \{Xin Bo\} and Li, \{Ke Zhi\}",

year = "2006",

month = apr,

day = "15",

doi = "10.1016/j.apsusc.2005.07.004",

language = "英语",

volume = "252",

pages = "4244--4249",

journal = "Applied Surface Science",

issn = "0169-4332",

publisher = "Elsevier B.V.",

number = "12",

}

Huang, JF, Li, HJ, Zeng, XR, Xiong, XB & Li, KZ 2006, ' Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites ', Applied Surface Science, 卷 252, 号码 12, 页码 4244-4249. https://doi.org/10.1016/j.apsusc.2005.07.004

Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites . / Huang, Jian Feng; Li, He Jun; Zeng, Xie Rong 等.
在: Applied Surface Science, 卷 252, 号码 12, 15.04.2006, 页码 4244-4249.

科研成果: 期刊稿件 › 文章 › 同行评审

TY - JOUR

T1 - Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon composites

AU - Huang, Jian Feng

AU - Li, He Jun

AU - Zeng, Xie Rong

AU - Xiong, Xin Bo

AU - Li, Ke Zhi

PY - 2006/4/15

Y1 - 2006/4/15

N2 - Oxidation protective SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon (C/C) composites were prepared with a two-step pack cementation process. The influence of preparation temperature and SiO 2 /Al 2 O 3 ratio of the pack powder on the phase, microstructure and oxidation resistance of the multi-coatings were investigated. It showed that the multi-coatings that contained mullite could be produced at 1700-1800 °C. A denser coating surface was acquired with the decrease of SiO 2 /Al 2 O 3 ratio in the pack chemistries while a little damnification to the interface of the coating and C/C substrate. The as-prepared coating could effectively protect C/C composites from oxidation at 1600 °C for 81 h.

AB - Oxidation protective SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon (C/C) composites were prepared with a two-step pack cementation process. The influence of preparation temperature and SiO 2 /Al 2 O 3 ratio of the pack powder on the phase, microstructure and oxidation resistance of the multi-coatings were investigated. It showed that the multi-coatings that contained mullite could be produced at 1700-1800 °C. A denser coating surface was acquired with the decrease of SiO 2 /Al 2 O 3 ratio in the pack chemistries while a little damnification to the interface of the coating and C/C substrate. The as-prepared coating could effectively protect C/C composites from oxidation at 1600 °C for 81 h.

KW - Carbon/carbon composites

KW - Coating

KW - Diffraction

KW - Oxidation

KW - Reflection

KW - Solid surfaces and solid interfaces

KW - Surface structure, morphology, roughness and topography

KW - X-ray scattering

UR - https://www.scopus.com/pages/publications/33646183007

U2 - 10.1016/j.apsusc.2005.07.004

DO - 10.1016/j.apsusc.2005.07.004

M3 - 文章

AN - SCOPUS:33646183007

SN - 0169-4332

VL - 252

SP - 4244

EP - 4249

JO - Applied Surface Science

JF - Applied Surface Science

IS - 12

ER -

Huang JF, Li HJ, Zeng XR, Xiong XB, Li KZ. Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites Applied Surface Science. 2006 4月 15;252(12):4244-4249. doi: 10.1016/j.apsusc.2005.07.004

Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al 2 O 3 -mullite multi-coatings for carbon/carbon composites

摘要

访问文件

其它文件与链接

学术指纹

引用此

Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al ₂ O ₃ -mullite multi-coatings for carbon/carbon composites