Fretting fatigue improvement of Ti6Al4V by coating and shot peening

Daoxin Liu; Xiaodong Zhu; Bin Tang; Jiawen He

Fretting fatigue improvement of Ti6Al4V by coating and shot peening

Daoxin Liu
, Xiaodong Zhu
, Bin Tang
, Jiawen He

航空学院

Xi'an Jiaotong University
Taiyuan University of Technology

科研成果: 期刊稿件 › 文章 › 同行评审

5 引用（Scopus）

摘要

Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.

源语言	英语
页（从-至）	246-250
页数	5
期刊	Journal of Materials Science and Technology
卷	21
期	2
出版状态	已出版 - 3月 2005

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{48cf5c28e79b41ec9c61dfb6341862da,

title = "Fretting fatigue improvement of Ti6Al4V by coating and shot peening",

abstract = "Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.",

keywords = "Coatings, Fretting fatigue, Shot peening, Ti-alloy",

author = "Daoxin Liu and Xiaodong Zhu and Bin Tang and Jiawen He",

year = "2005",

month = mar,

language = "英语",

volume = "21",

pages = "246--250",

journal = "Journal of Materials Science and Technology",

issn = "1005-0302",

publisher = "Chinese Society of Metals",

number = "2",

}

TY - JOUR

T1 - Fretting fatigue improvement of Ti6Al4V by coating and shot peening

AU - Liu, Daoxin

AU - Zhu, Xiaodong

AU - Tang, Bin

AU - He, Jiawen

PY - 2005/3

Y1 - 2005/3

N2 - Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.

AB - Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.

KW - Coatings

KW - Fretting fatigue

KW - Shot peening

KW - Ti-alloy

UR - https://www.scopus.com/pages/publications/18344392721

M3 - 文章

AN - SCOPUS:18344392721

SN - 1005-0302

VL - 21

SP - 246

EP - 250

JO - Journal of Materials Science and Technology

JF - Journal of Materials Science and Technology

IS - 2

ER -

Fretting fatigue improvement of Ti6Al4V by coating and shot peening

摘要

其它文件与链接

学术指纹

引用此