Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics

Liuyi Xiang; Laifei Cheng; Yi Hou; Fuyuan Wang; Liangjun Li; Litong Zhang

doi:10.1016/j.jeurceramsoc.2014.04.021

Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics

Liuyi Xiang
, Laifei Cheng
, Yi Hou
, Fuyuan Wang
, Liangjun Li
, Litong Zhang

材料学院

Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

41 引用（Scopus）

摘要

Laminated HfC-SiC/BN ceramics were successfully fabricated by tape casting and hot pressing. Fully dense HfC-SiC ultra-high temperature ceramics with homogeneous structure were obtained. The introduction of the weak BN layer resulted in a slight decrease of the flexural strength but significantly improved the fracture toughness compared with monolithic HfC-SiC ceramics. The fracture toughness of laminated HfC-SiC/BN ceramics in the parallel direction peaked at 8.06±0.46MPam^1/2, which increased by 115% than that of monolithic HfC-SiC ceramics. The composites showed non-catastrophic fracture behaviors in both parallel and perpendicular directions. It indicates that laminated structure design is a promising approach to obtain full density HfC-SiC ceramics with high fracture toughness.

源语言	英语
页（从-至）	3635-3640
页数	6
期刊	Journal of the European Ceramic Society
卷	34
期	15
DOI	https://doi.org/10.1016/j.jeurceramsoc.2014.04.021
出版状态	已出版 - 12月 2014

访问文件

10.1016/j.jeurceramsoc.2014.04.021

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{108de2fa6601459dbabd94b2a3fdf102,

title = "Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics",

abstract = "Laminated HfC-SiC/BN ceramics were successfully fabricated by tape casting and hot pressing. Fully dense HfC-SiC ultra-high temperature ceramics with homogeneous structure were obtained. The introduction of the weak BN layer resulted in a slight decrease of the flexural strength but significantly improved the fracture toughness compared with monolithic HfC-SiC ceramics. The fracture toughness of laminated HfC-SiC/BN ceramics in the parallel direction peaked at 8.06±0.46MPam1/2, which increased by 115\% than that of monolithic HfC-SiC ceramics. The composites showed non-catastrophic fracture behaviors in both parallel and perpendicular directions. It indicates that laminated structure design is a promising approach to obtain full density HfC-SiC ceramics with high fracture toughness.",

keywords = "Hot pressing, Laminated HfC-SiC ceramics, Mechanical properties, Microstructure",

author = "Liuyi Xiang and Laifei Cheng and Yi Hou and Fuyuan Wang and Liangjun Li and Litong Zhang",

year = "2014",

month = dec,

doi = "10.1016/j.jeurceramsoc.2014.04.021",

language = "英语",

volume = "34",

pages = "3635--3640",

journal = "Journal of the European Ceramic Society",

issn = "0955-2219",

publisher = "Elsevier B.V.",

number = "15",

}

TY - JOUR

T1 - Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics

AU - Xiang, Liuyi

AU - Cheng, Laifei

AU - Hou, Yi

AU - Wang, Fuyuan

AU - Li, Liangjun

AU - Zhang, Litong

PY - 2014/12

Y1 - 2014/12

N2 - Laminated HfC-SiC/BN ceramics were successfully fabricated by tape casting and hot pressing. Fully dense HfC-SiC ultra-high temperature ceramics with homogeneous structure were obtained. The introduction of the weak BN layer resulted in a slight decrease of the flexural strength but significantly improved the fracture toughness compared with monolithic HfC-SiC ceramics. The fracture toughness of laminated HfC-SiC/BN ceramics in the parallel direction peaked at 8.06±0.46MPam1/2, which increased by 115% than that of monolithic HfC-SiC ceramics. The composites showed non-catastrophic fracture behaviors in both parallel and perpendicular directions. It indicates that laminated structure design is a promising approach to obtain full density HfC-SiC ceramics with high fracture toughness.

AB - Laminated HfC-SiC/BN ceramics were successfully fabricated by tape casting and hot pressing. Fully dense HfC-SiC ultra-high temperature ceramics with homogeneous structure were obtained. The introduction of the weak BN layer resulted in a slight decrease of the flexural strength but significantly improved the fracture toughness compared with monolithic HfC-SiC ceramics. The fracture toughness of laminated HfC-SiC/BN ceramics in the parallel direction peaked at 8.06±0.46MPam1/2, which increased by 115% than that of monolithic HfC-SiC ceramics. The composites showed non-catastrophic fracture behaviors in both parallel and perpendicular directions. It indicates that laminated structure design is a promising approach to obtain full density HfC-SiC ceramics with high fracture toughness.

KW - Hot pressing

KW - Laminated HfC-SiC ceramics

KW - Mechanical properties

KW - Microstructure

UR - https://www.scopus.com/pages/publications/84905509818

U2 - 10.1016/j.jeurceramsoc.2014.04.021

DO - 10.1016/j.jeurceramsoc.2014.04.021

M3 - 文章

AN - SCOPUS:84905509818

SN - 0955-2219

VL - 34

SP - 3635

EP - 3640

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

IS - 15

ER -

Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics

摘要

访问文件

其它文件与链接

指纹

引用此