Estimation of laser solid forming process based on temperature measurement

By using a moving disc heat source model, an analytical model was developed to describe laser solid forming (LSF) process with the feedback of the surface temperature of the molten pool, which can be used to estimate the geometric characterizations (width and height) of the clad layer rapidly. An on-line temperature measurement system was established and some single-pass cladding experiments were conducted while the molten pool temperature was monitored. It was found that the estimated geometric characterizations agreed well with the experimental results. In addition, the power consumed by conduction, convection, radiation, evaporation and absorption during LSF were also estimated by the model. It was shown that the majority of the total absorbed power was conducted to the substrate. The effective model can not only be used to optimize the processing parameters but also potentially applied to the real-time feedback control.