TY - JOUR
T1 - Effects of speed matching on the performance and flow characteristics of a counter-rotating axial-flow compressor under inlet distortion
AU - Li, Min
AU - Mao, Xiaochen
AU - Wang, Wenjie
AU - Gao, Limin
AU - Liu, Bo
N1 - Publisher Copyright:
© 2026 Elsevier Masson SAS.
PY - 2026/12
Y1 - 2026/12
N2 - This study investigates the effects of speed matching on a counter-rotating axial-flow compressor (CRAC) under total-pressure inlet distortion using full-annulus three-dimensional numerical simulations. The influences of different speed-matching schemes on aerodynamic performance, distortion propagation, tip-region flow structures, and stall-sensitive regions are analyzed. The results show that speed matching systematically shifts the compressor characteristic curves and significantly alters the maximum pressure ratio. Compared with the rear rotor, the front rotor has a stronger influence on the overall aerodynamic performance. The high-speed balanced matching scheme provides greater work input and flow capacity, thereby improving total-pressure rise and distortion attenuation. In contrast, the low-speed asymmetric matching schemes exhibit more severe performance degradation under distorted inflow, with the relative stall-margin reduction reaching up to 95%. Flow-field analysis shows that speed matching governs the inter-rotor transfer and attenuation of distorted low-momentum fluid by modifying the work split, flow capacity, and tip-region loading of the two rotors. This process further affects the development of tip-leakage flow, leading-edge spillage, and passage blockage, resulting in a redistribution of stall-sensitive regions between the front and rear rotors. Analyses of blockage factor, entropy, and vortex structures indicate that the first-stall stage migrates with the speed-matching scheme. Appropriate speed matching can therefore mitigate the adverse effects of inlet distortion, although a balance must be achieved among pressure-rise capability, distortion attenuation, and suppression of local tip-region instability.
AB - This study investigates the effects of speed matching on a counter-rotating axial-flow compressor (CRAC) under total-pressure inlet distortion using full-annulus three-dimensional numerical simulations. The influences of different speed-matching schemes on aerodynamic performance, distortion propagation, tip-region flow structures, and stall-sensitive regions are analyzed. The results show that speed matching systematically shifts the compressor characteristic curves and significantly alters the maximum pressure ratio. Compared with the rear rotor, the front rotor has a stronger influence on the overall aerodynamic performance. The high-speed balanced matching scheme provides greater work input and flow capacity, thereby improving total-pressure rise and distortion attenuation. In contrast, the low-speed asymmetric matching schemes exhibit more severe performance degradation under distorted inflow, with the relative stall-margin reduction reaching up to 95%. Flow-field analysis shows that speed matching governs the inter-rotor transfer and attenuation of distorted low-momentum fluid by modifying the work split, flow capacity, and tip-region loading of the two rotors. This process further affects the development of tip-leakage flow, leading-edge spillage, and passage blockage, resulting in a redistribution of stall-sensitive regions between the front and rear rotors. Analyses of blockage factor, entropy, and vortex structures indicate that the first-stall stage migrates with the speed-matching scheme. Appropriate speed matching can therefore mitigate the adverse effects of inlet distortion, although a balance must be achieved among pressure-rise capability, distortion attenuation, and suppression of local tip-region instability.
KW - Counter-rotating axial-flow compressor
KW - First-stall stage
KW - Inlet distortion
KW - Speed-matching
KW - Stall margin
UR - https://www.scopus.com/pages/publications/105048168074
U2 - 10.1016/j.ast.2026.113595
DO - 10.1016/j.ast.2026.113595
M3 - 文章
AN - SCOPUS:105048168074
SN - 1270-9638
VL - 179
JO - Aerospace Science and Technology
JF - Aerospace Science and Technology
M1 - 113595
ER -