TY - JOUR
T1 - Effects of fiber hybridization on structural evolution, mechanical performance, and ablation resistance of high thermal conductivity carbon/carbon composites
AU - Yang, Qiqian
AU - Peng, Jingya
AU - Liang, Yini
AU - Yang, Zichen
AU - Liu, Tianyu
AU - Yan, Zhicong
AU - Song, Qiang
AU - Zhang, Shouyang
AU - Shen, Qingliang
N1 - Publisher Copyright:
© 2026
PY - 2026/11
Y1 - 2026/11
N2 - High thermal conductivity carbon/carbon (C/C) composites reinforced with mesophase pitch-based carbon fibers (CFMP) can balance thermal loads, alleviate thermal gradient stresses, and improve ablation resistance in aerothermal protection components. However, their insufficient load-bearing capability remains a key limitation for structural applications. Herein, high-strength polyacrylonitrile-based carbon fibers (CFPAN) were hybridized with highly thermally conductive CFMP to synergistically regulate the mechanical performance and thermal conductivity of C/C composites. The relationships among fiber hybridization, microstructural evolution, flexural behavior, thermal transport, and oxyacetylene ablation resistance were investigated. Low CFPAN incorporation produced a pronounced positive hybrid effect: at ηPAN = 11.11%, the flexural strength reached 399 MPa, representing a 27.1% increase relative to the pure CFMP-reinforced composite. At this low hybrid ratio, the composite maintained a thermal conductivity above 425 W/(m·K), indicating a balance between high thermal conductivity and load-bearing capability. Microstructural analysis revealed that fiber hybridization regulated graphitization of the pyrolytic carbon (PyC) matrix and homogenized the pore and defect size distribution. During oxyacetylene ablation, CFMP provided efficient heat transfer pathways, whereas CFPAN formed a stable load-bearing skeleton against gas erosion. After 60 s of high-heat-flux ablation, the composite with ηPAN = 52.94% exhibited a linear ablation rate approximately 40% lower than that of the pure CFMP-reinforced composite. These findings demonstrate a fiber hybridization route for optimizing thermal transport, mechanical reliability, and ablation resistance in C/C composites.
AB - High thermal conductivity carbon/carbon (C/C) composites reinforced with mesophase pitch-based carbon fibers (CFMP) can balance thermal loads, alleviate thermal gradient stresses, and improve ablation resistance in aerothermal protection components. However, their insufficient load-bearing capability remains a key limitation for structural applications. Herein, high-strength polyacrylonitrile-based carbon fibers (CFPAN) were hybridized with highly thermally conductive CFMP to synergistically regulate the mechanical performance and thermal conductivity of C/C composites. The relationships among fiber hybridization, microstructural evolution, flexural behavior, thermal transport, and oxyacetylene ablation resistance were investigated. Low CFPAN incorporation produced a pronounced positive hybrid effect: at ηPAN = 11.11%, the flexural strength reached 399 MPa, representing a 27.1% increase relative to the pure CFMP-reinforced composite. At this low hybrid ratio, the composite maintained a thermal conductivity above 425 W/(m·K), indicating a balance between high thermal conductivity and load-bearing capability. Microstructural analysis revealed that fiber hybridization regulated graphitization of the pyrolytic carbon (PyC) matrix and homogenized the pore and defect size distribution. During oxyacetylene ablation, CFMP provided efficient heat transfer pathways, whereas CFPAN formed a stable load-bearing skeleton against gas erosion. After 60 s of high-heat-flux ablation, the composite with ηPAN = 52.94% exhibited a linear ablation rate approximately 40% lower than that of the pure CFMP-reinforced composite. These findings demonstrate a fiber hybridization route for optimizing thermal transport, mechanical reliability, and ablation resistance in C/C composites.
KW - 3D hybrid braided C/C composites
KW - Ablation resistance
KW - DIC
KW - Hybrid effect
KW - Multi-scale characterization
KW - Synergistic mechanical-thermal performance
UR - https://www.scopus.com/pages/publications/105046057038
U2 - 10.1016/j.compositesb.2026.114028
DO - 10.1016/j.compositesb.2026.114028
M3 - 文章
AN - SCOPUS:105046057038
SN - 1359-8368
VL - 326
JO - Composites Part B: Engineering
JF - Composites Part B: Engineering
M1 - 114028
ER -