TY - JOUR
T1 - Configurational entropy-guided screening
T2 - Fabrication of plate-like high-entropy perovskite (Ba0.2Sr0.2Ca0.2Pb0.2La0.2)10/11TiO3 seed crystals via a quaternary aurivillius precursor
AU - Chen, Danni
AU - Wei, Ziyao
AU - Xu, Xiaoyu
AU - Gao, Bingyan
AU - Chen, Penghui
AU - Zhang, Ping
AU - Liu, Xiangchun
AU - Gao, Feng
N1 - Publisher Copyright:
© 2026 Elsevier Ltd.
PY - 2027/3
Y1 - 2027/3
N2 - Plate-like seed crystals combining high aspect ratio, compositional compatibility, and tunable electrical resistivity are desirable for textured high-entropy perovskite ceramics. Here, a configurational entropy-guided Aurivillius precursor-screening strategy combined with reductive annealing was developed to prepare (Ba0.2Sr0.2Ca0.2Pb0.2La0.2)10/11TiO3 seed crystals. Among the precursor series, (Ba0.25Sr0.25Ca0.25Pb0.25)Bi4Ti4O15 exhibited the highest aspect ratio of 22.62 and contained four target A-site cations. It was therefore selected for topochemical conversion. Target-cation pre-incorporation can shorten diffusion paths and favor local lattice rearrangement, promoting morphology inheritance. Conversion at 1050 ℃ yielded plate-like (Ba0.2Sr0.2Ca0.2Pb0.2La0.2)10/11TiO3 with an aspect ratio of 17.13. After reductive annealing, the aspect ratio remained 15.86 while the powder resistivity decreased to 2.76 × 107 Ω·cm, demonstrating effective resistivity regulation with good morphology retention. Co-firing with a (Sr0.9La0.1)20/21TiO3 evaluation matrix at 1450 ℃ confirmed high-temperature morphological stability. This work provides a practical route for preparing high-aspect-ratio, compositionally compatible seed crystals with tunable electrical resistivity for textured high-entropy perovskite ceramics.
AB - Plate-like seed crystals combining high aspect ratio, compositional compatibility, and tunable electrical resistivity are desirable for textured high-entropy perovskite ceramics. Here, a configurational entropy-guided Aurivillius precursor-screening strategy combined with reductive annealing was developed to prepare (Ba0.2Sr0.2Ca0.2Pb0.2La0.2)10/11TiO3 seed crystals. Among the precursor series, (Ba0.25Sr0.25Ca0.25Pb0.25)Bi4Ti4O15 exhibited the highest aspect ratio of 22.62 and contained four target A-site cations. It was therefore selected for topochemical conversion. Target-cation pre-incorporation can shorten diffusion paths and favor local lattice rearrangement, promoting morphology inheritance. Conversion at 1050 ℃ yielded plate-like (Ba0.2Sr0.2Ca0.2Pb0.2La0.2)10/11TiO3 with an aspect ratio of 17.13. After reductive annealing, the aspect ratio remained 15.86 while the powder resistivity decreased to 2.76 × 107 Ω·cm, demonstrating effective resistivity regulation with good morphology retention. Co-firing with a (Sr0.9La0.1)20/21TiO3 evaluation matrix at 1450 ℃ confirmed high-temperature morphological stability. This work provides a practical route for preparing high-aspect-ratio, compositionally compatible seed crystals with tunable electrical resistivity for textured high-entropy perovskite ceramics.
KW - Aurivillius
KW - High-entropy perovskite
KW - Molten salt synthesis
KW - Plate-like powders
KW - Topochemical microcrystal conversion
UR - https://www.scopus.com/pages/publications/105052211918
U2 - 10.1016/j.jeurceramsoc.2026.118905
DO - 10.1016/j.jeurceramsoc.2026.118905
M3 - 文章
AN - SCOPUS:105052211918
SN - 0955-2219
VL - 47
JO - Journal of the European Ceramic Society
JF - Journal of the European Ceramic Society
IS - 3
M1 - 118905
ER -