TY - JOUR
T1 - Catalyst-Free Thiol–Yne Click Polymerization-Induced Autophotosensitive Polyimide for Negative Lithography
AU - Xu, Tianyuan
AU - Liu, Zhao
AU - Xie, Junjian
AU - Xue, Shuyu
AU - Ren, Xiaoming
AU - Liu, Yunfei
AU - Zhu, Qiangqiang
AU - Shen, Yu
AU - Zhang, Qiuyu
N1 - Publisher Copyright:
© 2026 American Chemical Society
PY - 2026/8/5
Y1 - 2026/8/5
N2 - Photosensitive polyimide (PSPI) is widely used as a protective and insulating layer in electronic components, attracting considerable interest in semiconductor manufacturing and optoelectronics. However, conventional PSPIs often face challenges such as complex monomer synthesis, lengthy processing, high imidization temperatures, and inadequate mechanical properties. In this work, a soluble polyimide (FAT) containing main-chain double bonds was rapidly synthesized within 2 h via catalyst-free thiol–yne click reaction at room temperature. This intrinsic negative-tone photosensitive system cross-links through its double bonds under light, eliminating the need for photoinitiators or high-temperature imidization. The FAT polyimide enables high-resolution patterning up to 4 μm. After exposure at 50 J/cm2, the film exhibits a glass transition temperature (Tg) of 217 °C, a decomposition temperature (Td5%) of 361 °C, a tensile strength of 108.1 MPa, and an elongation at break of 15.1%. It also demonstrates good optical transparency, with a UV cutoff at 377 nm and transmittances of 67.8% at 450 nm and 80.2% at 550 nm. Therefore, the synthesized FAT polyimide represents a promising candidate for high-resolution insulation layers and advanced microelectronics packaging.
AB - Photosensitive polyimide (PSPI) is widely used as a protective and insulating layer in electronic components, attracting considerable interest in semiconductor manufacturing and optoelectronics. However, conventional PSPIs often face challenges such as complex monomer synthesis, lengthy processing, high imidization temperatures, and inadequate mechanical properties. In this work, a soluble polyimide (FAT) containing main-chain double bonds was rapidly synthesized within 2 h via catalyst-free thiol–yne click reaction at room temperature. This intrinsic negative-tone photosensitive system cross-links through its double bonds under light, eliminating the need for photoinitiators or high-temperature imidization. The FAT polyimide enables high-resolution patterning up to 4 μm. After exposure at 50 J/cm2, the film exhibits a glass transition temperature (Tg) of 217 °C, a decomposition temperature (Td5%) of 361 °C, a tensile strength of 108.1 MPa, and an elongation at break of 15.1%. It also demonstrates good optical transparency, with a UV cutoff at 377 nm and transmittances of 67.8% at 450 nm and 80.2% at 550 nm. Therefore, the synthesized FAT polyimide represents a promising candidate for high-resolution insulation layers and advanced microelectronics packaging.
UR - https://www.scopus.com/pages/publications/105046716382
U2 - 10.1021/acs.iecr.6c02475
DO - 10.1021/acs.iecr.6c02475
M3 - 文章
AN - SCOPUS:105046716382
SN - 0888-5885
VL - 65
SP - 16337
EP - 16344
JO - Industrial and Engineering Chemistry Research
JF - Industrial and Engineering Chemistry Research
IS - 30
ER -