TY - JOUR
T1 - An experimental study of deformation mechanism and microstructure evolution during hot deformation of Ti-6Al-2Zr-1Mo-1V alloy
AU - He, D.
AU - Zhu, J. C.
AU - Lai, Z. H.
AU - Liu, Y.
AU - Yang, X. W.
PY - 2013/4
Y1 - 2013/4
N2 - Isothermal tensile tests have been performed to study the deformation mechanisms and microstructure evolution of Ti-6Al-2Zr-1Mo-1V titanium alloy in the temperature range 750-850°C and strain rate range 0.001-0.1s-1. The deformation activations have been calculated based on kinetics rate equation to investigate the hot deformation mechanism. Microstructures of deformed samples have been analyzed by electron backscatter diffraction (EBSD) to evaluate the influences of hot deformation parameters on the microstructure evolution and recrystallization mechanism. The results indicate that deformation mechanisms vary with deformation conditions: at medium (800°C) and high (850°C) temperature, the deformation is mainly controlled by the mechanisms of dislocation creep and self-diffusion, respectively. The microstructure globularization mechanisms also depend on deformation temperature: in the temperature range from 750 to 800°C, the high angle grain boundaries are mainly formed via dislocation accumulation or subgrain boundaries sliding and subgrains rotation; while at high temperature of 850°C, recrystallization is the dominant mechanism. Especially, the evolution of the recrystallization mechanism with the deformation temperature is first observed and investigated in TA15 titanium alloy.
AB - Isothermal tensile tests have been performed to study the deformation mechanisms and microstructure evolution of Ti-6Al-2Zr-1Mo-1V titanium alloy in the temperature range 750-850°C and strain rate range 0.001-0.1s-1. The deformation activations have been calculated based on kinetics rate equation to investigate the hot deformation mechanism. Microstructures of deformed samples have been analyzed by electron backscatter diffraction (EBSD) to evaluate the influences of hot deformation parameters on the microstructure evolution and recrystallization mechanism. The results indicate that deformation mechanisms vary with deformation conditions: at medium (800°C) and high (850°C) temperature, the deformation is mainly controlled by the mechanisms of dislocation creep and self-diffusion, respectively. The microstructure globularization mechanisms also depend on deformation temperature: in the temperature range from 750 to 800°C, the high angle grain boundaries are mainly formed via dislocation accumulation or subgrain boundaries sliding and subgrains rotation; while at high temperature of 850°C, recrystallization is the dominant mechanism. Especially, the evolution of the recrystallization mechanism with the deformation temperature is first observed and investigated in TA15 titanium alloy.
KW - Deformation mechanism
KW - Electron backscatter diffraction
KW - Microstructure globularization
KW - Recrystallization mechanism
KW - Titanium alloys
UR - https://www.scopus.com/pages/publications/84868612960
U2 - 10.1016/j.matdes.2012.09.045
DO - 10.1016/j.matdes.2012.09.045
M3 - 文章
AN - SCOPUS:84868612960
SN - 0264-1275
VL - 46
SP - 38
EP - 48
JO - Materials and Design
JF - Materials and Design
ER -