跳到主要导航 跳到搜索 跳到主要内容

A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing

  • Song Du
  • , Fei Teng
  • , Zicheng Zhuang
  • , Dong Zhang
  • , Mingyang Li
  • , Heng Li
  • , Yiwei Weng
  • Hong Kong Polytechnic University
  • Fuzhou University
  • Nanyang Technological University

科研成果: 期刊稿件 › 文章 › 同行评审

47 引用 (Scopus)

摘要

3D concrete printing (3DCP) has attracted significant attention due to the benefits of enhanced productivity and sustainability. However, existing 3DCP techniques face challenges of automation and practicality in integrating conventional rebar reinforcement with printed concrete structures. This study presents an automated robot system coupled with Building Information Modeling (BIM) to address the challenge. Dynamo scripts in BIM were used to generate printing paths, further optimised by a proposed algorithm for incorporating rebar reinforcement. A deep learning model was adopted to identify rebars with large aspect ratios. The average accuracy of rebar recognition is 92.5%, with a position error within 2 mm. A centralised control system was developed for multiple-device communication, including a camera, a robot arm, and a gripper. Finally, a real-time demonstration was conducted, representing the first practical demonstration of an automated robotic system to integrate rebar reinforcement with printed structures using BIM-generated data in the physical world.

源语言英语
期刊论文编号e2332423
期刊Virtual and Physical Prototyping
卷19
期1
DOI
出版状态已出版 - 2024
已对外发布是

学术指纹

探究 'A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing' 的科研主题。它们共同构成独一无二的学术指纹。

引用此