The interface and grain growth in cofired ferroelectric / ferrite multilayer composites

Feng Gao; Changsong Zhang; Xiangchun Liu; Changsheng Tian

doi:10.4028/0-87849-960-1.1185

The interface and grain growth in cofired ferroelectric / ferrite multilayer composites

Feng Gao, Changsong Zhang, Xiangchun Liu, Changsheng Tian

School of Materials Sience and Engineering

Northwestern Polytechnical University Xian

Research output: Contribution to journal › Conference article › peer-review

3 Scopus citations

Abstract

The multilayer composites were prepared by cofiring Pb(Ni _1/3Nb_2/3)O₃-based ferroelectrics and NiCuZn ferrite using tape casting processes. The interface and grain growth of the composites were investigated. The results show that the sintered interface of composites is solid, continuous with no delamination and cracks, which should be attributed to the chemical compatible of the two materials. The grain growth of ferroelectrics adjacent to the interface is different from that far from the interface. It should attribute to Fe³⁺ diffused from the ferrite to ferroelectrics and soluted into the perovskite lattice. The difference factor d_D is proposed to describe the microstructure difference between the interface and the inner parts.

Original language	English
Pages (from-to)	1185-1188
Number of pages	4
Journal	Materials Science Forum
Volume	475-479
Issue number	II
DOIs	https://doi.org/10.4028/0-87849-960-1.1185
State	Published - 2005
Event	PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing - Beijing, China Duration: 2 Nov 2004 → 5 Nov 2004

Keywords

Ferrite
Ferroelectrics
Interface
Multilayer composite

Access to Document

10.4028/0-87849-960-1.1185

Cite this

@article{93d01146b05749b1b9841da1412aac7c,

title = "The interface and grain growth in cofired ferroelectric / ferrite multilayer composites",

abstract = "The multilayer composites were prepared by cofiring Pb(Ni 1/3Nb2/3)O3-based ferroelectrics and NiCuZn ferrite using tape casting processes. The interface and grain growth of the composites were investigated. The results show that the sintered interface of composites is solid, continuous with no delamination and cracks, which should be attributed to the chemical compatible of the two materials. The grain growth of ferroelectrics adjacent to the interface is different from that far from the interface. It should attribute to Fe3+ diffused from the ferrite to ferroelectrics and soluted into the perovskite lattice. The difference factor dD is proposed to describe the microstructure difference between the interface and the inner parts.",

keywords = "Ferrite, Ferroelectrics, Interface, Multilayer composite",

author = "Feng Gao and Changsong Zhang and Xiangchun Liu and Changsheng Tian",

year = "2005",

doi = "10.4028/0-87849-960-1.1185",

language = "英语",

volume = "475-479",

pages = "1185--1188",

journal = "Materials Science Forum",

issn = "0255-5476",

publisher = "Trans Tech Publications Ltd",

number = "II",

note = "PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing ; Conference date: 02-11-2004 Through 05-11-2004",

}

TY - JOUR

T1 - The interface and grain growth in cofired ferroelectric / ferrite multilayer composites

AU - Gao, Feng

AU - Zhang, Changsong

AU - Liu, Xiangchun

AU - Tian, Changsheng

PY - 2005

Y1 - 2005

N2 - The multilayer composites were prepared by cofiring Pb(Ni 1/3Nb2/3)O3-based ferroelectrics and NiCuZn ferrite using tape casting processes. The interface and grain growth of the composites were investigated. The results show that the sintered interface of composites is solid, continuous with no delamination and cracks, which should be attributed to the chemical compatible of the two materials. The grain growth of ferroelectrics adjacent to the interface is different from that far from the interface. It should attribute to Fe3+ diffused from the ferrite to ferroelectrics and soluted into the perovskite lattice. The difference factor dD is proposed to describe the microstructure difference between the interface and the inner parts.

AB - The multilayer composites were prepared by cofiring Pb(Ni 1/3Nb2/3)O3-based ferroelectrics and NiCuZn ferrite using tape casting processes. The interface and grain growth of the composites were investigated. The results show that the sintered interface of composites is solid, continuous with no delamination and cracks, which should be attributed to the chemical compatible of the two materials. The grain growth of ferroelectrics adjacent to the interface is different from that far from the interface. It should attribute to Fe3+ diffused from the ferrite to ferroelectrics and soluted into the perovskite lattice. The difference factor dD is proposed to describe the microstructure difference between the interface and the inner parts.

KW - Ferrite

KW - Ferroelectrics

KW - Interface

KW - Multilayer composite

UR - http://www.scopus.com/inward/record.url?scp=17044376271&partnerID=8YFLogxK

U2 - 10.4028/0-87849-960-1.1185

DO - 10.4028/0-87849-960-1.1185

M3 - 会议文章

AN - SCOPUS:17044376271

SN - 0255-5476

VL - 475-479

SP - 1185

EP - 1188

JO - Materials Science Forum

JF - Materials Science Forum

IS - II

T2 - PRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing

Y2 - 2 November 2004 through 5 November 2004

ER -

The interface and grain growth in cofired ferroelectric / ferrite multilayer composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this