The Aging Performance of PVDF in Acid Oil and Gas Medium

In the process of transporting oil and gas, the service performance of thermoplastic pipes will decline due to the multiple influences of medium, temperature, and pressure. In order to study the service performance changes of PVDF pipes under oil and gas transportation conditions, the high-temperature autoclave is used to simulate the service state of the pipe in the mediums. The PVDF samples are exposed to simulated oil and gas mediums for 1 week, 3 weeks, 5 weeks, and 7 weeks under 60 °C and 90 °C conditions. After the exposure test, the physical and chemical properties of the PVDF pipe are tested and compared with the initial samples. Compared with the initial sample, the sample quality after the exposure test has a slight increase, with growth rates of 2% and 3% at 60 °C and 90 °C, respectively. Meanwhile, the tensile strength of the samples is about 13% and 21% lower than that of the initial sample, respectively. According to the microscopic morphology analyses, there are some crack defects on the surface of the sample after the exposure test. Through infrared analysis, it is shown that no molecular chain breakage, crosslinking, or other reactions are found after the exposure test. The above analysis shows that the PVDF sample has slight penetration and swelling during the exposure test. However, due to the large force between the PVDF molecules, its mechanical properties have a small downward trend, showing excellent environmental stress crack resistance.