Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb2O3 and melamine cyanurate

Hui juan Zhang; Zhao zhu Zhang; Fang Guo; Wei Jiang; Wei min Liu

doi:10.1016/j.triboint.2009.03.002

Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb₂O₃ and melamine cyanurate

Hui juan Zhang
, Zhao zhu Zhang
, Fang Guo
, Wei Jiang
, Wei min Liu

Research output: Contribution to journal › Article › peer-review

27 Scopus citations

Abstract

The tribological behavior of the hybrid PTFE/cotton fabric composites filled with microsize Sb₂O₃ and melamine cyanurate (MCA) was investigated. It was found that the wear rate of the hybrid PTFE/cotton fabric composites decreased when Sb₂O₃ was used as the filler but increased with MCA filler. It was also observed that hybrid fillers (consists of Sb₂O₃ and MCA) had a wear reduction effect on the hybrid PTFE/cotton fabric composites at lower loads but increased the wear rate at higher loads. The wear behavior of the composites was explained in terms of the topography of worn surfaces and transfer film formed on the counterpart pin.

Original language	English
Pages (from-to)	1061-1066
Number of pages	6
Journal	Tribology International
Volume	42
Issue number	7
DOIs	https://doi.org/10.1016/j.triboint.2009.03.002
State	Published - Jul 2009
Externally published	Yes

Keywords

Friction and wear
Hybrid PTFE/cotton fabric composites
MCA
SbO

Access to Document

10.1016/j.triboint.2009.03.002

Cite this

@article{5e39c4e8579f4445a34bb275babfac58,

title = "Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb2O3 and melamine cyanurate",

abstract = "The tribological behavior of the hybrid PTFE/cotton fabric composites filled with microsize Sb2O3 and melamine cyanurate (MCA) was investigated. It was found that the wear rate of the hybrid PTFE/cotton fabric composites decreased when Sb2O3 was used as the filler but increased with MCA filler. It was also observed that hybrid fillers (consists of Sb2O3 and MCA) had a wear reduction effect on the hybrid PTFE/cotton fabric composites at lower loads but increased the wear rate at higher loads. The wear behavior of the composites was explained in terms of the topography of worn surfaces and transfer film formed on the counterpart pin.",

keywords = "Friction and wear, Hybrid PTFE/cotton fabric composites, MCA, SbO",

author = "Zhang, \{Hui juan\} and Zhang, \{Zhao zhu\} and Fang Guo and Wei Jiang and Liu, \{Wei min\}",

year = "2009",

month = jul,

doi = "10.1016/j.triboint.2009.03.002",

language = "英语",

volume = "42",

pages = "1061--1066",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

number = "7",

}

TY - JOUR

T1 - Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb2O3 and melamine cyanurate

AU - Zhang, Hui juan

AU - Zhang, Zhao zhu

AU - Guo, Fang

AU - Jiang, Wei

AU - Liu, Wei min

PY - 2009/7

Y1 - 2009/7

N2 - The tribological behavior of the hybrid PTFE/cotton fabric composites filled with microsize Sb2O3 and melamine cyanurate (MCA) was investigated. It was found that the wear rate of the hybrid PTFE/cotton fabric composites decreased when Sb2O3 was used as the filler but increased with MCA filler. It was also observed that hybrid fillers (consists of Sb2O3 and MCA) had a wear reduction effect on the hybrid PTFE/cotton fabric composites at lower loads but increased the wear rate at higher loads. The wear behavior of the composites was explained in terms of the topography of worn surfaces and transfer film formed on the counterpart pin.

AB - The tribological behavior of the hybrid PTFE/cotton fabric composites filled with microsize Sb2O3 and melamine cyanurate (MCA) was investigated. It was found that the wear rate of the hybrid PTFE/cotton fabric composites decreased when Sb2O3 was used as the filler but increased with MCA filler. It was also observed that hybrid fillers (consists of Sb2O3 and MCA) had a wear reduction effect on the hybrid PTFE/cotton fabric composites at lower loads but increased the wear rate at higher loads. The wear behavior of the composites was explained in terms of the topography of worn surfaces and transfer film formed on the counterpart pin.

KW - Friction and wear

KW - Hybrid PTFE/cotton fabric composites

KW - MCA

KW - SbO

UR - https://www.scopus.com/pages/publications/65649088739

U2 - 10.1016/j.triboint.2009.03.002

DO - 10.1016/j.triboint.2009.03.002

M3 - 文章

AN - SCOPUS:65649088739

SN - 0301-679X

VL - 42

SP - 1061

EP - 1066

JO - Tribology International

JF - Tribology International

IS - 7

ER -

Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb₂O₃ and melamine cyanurate

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this