Preparation of yttrium aluminum garnet fibers by the sol-gel method

Hongbin Tan; Xiaoling Ma; Jinhua Lu; Kezhi Li

Preparation of yttrium aluminum garnet fibers by the sol-gel method

Hongbin Tan
, Xiaoling Ma
, Jinhua Lu
, Kezhi Li

School of Materials Sience and Engineering

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Abstract

The yttrium aluminum garnet (YAG) fibers were prepared by the sol-gel method using aluminum chloride, aluminum powder, yttrium oxide and acetic acid as raw materials. The effect of the spinning additive on gel fibers length was studied. Long gel fibers were obtained by added polyvinylpyrrolidone (PVP) as an additive, with 23 cm in length. YAG fibers were obtained by sintering at 1000°C for 1 h, with about 16 μm in diameter and smooth surface.

Original language	English
Pages (from-to)	187-190
Number of pages	4
Journal	Ceramics - Silikaty
Volume	56
Issue number	3
State	Published - 2012

Keywords

Fibers
PVP
Sol-gel method
YAG

Cite this

@article{3174ff6c93f4439da799a51836918c68,

title = "Preparation of yttrium aluminum garnet fibers by the sol-gel method",

abstract = "The yttrium aluminum garnet (YAG) fibers were prepared by the sol-gel method using aluminum chloride, aluminum powder, yttrium oxide and acetic acid as raw materials. The effect of the spinning additive on gel fibers length was studied. Long gel fibers were obtained by added polyvinylpyrrolidone (PVP) as an additive, with 23 cm in length. YAG fibers were obtained by sintering at 1000°C for 1 h, with about 16 μm in diameter and smooth surface.",

keywords = "Fibers, PVP, Sol-gel method, YAG",

author = "Hongbin Tan and Xiaoling Ma and Jinhua Lu and Kezhi Li",

year = "2012",

language = "英语",

volume = "56",

pages = "187--190",

journal = "Ceramics - Silikaty",

issn = "0862-5468",

publisher = "University of Chemistry and Technology, Faculty of Environmental Technology",

number = "3",

}

TY - JOUR

T1 - Preparation of yttrium aluminum garnet fibers by the sol-gel method

AU - Tan, Hongbin

AU - Ma, Xiaoling

AU - Lu, Jinhua

AU - Li, Kezhi

PY - 2012

Y1 - 2012

N2 - The yttrium aluminum garnet (YAG) fibers were prepared by the sol-gel method using aluminum chloride, aluminum powder, yttrium oxide and acetic acid as raw materials. The effect of the spinning additive on gel fibers length was studied. Long gel fibers were obtained by added polyvinylpyrrolidone (PVP) as an additive, with 23 cm in length. YAG fibers were obtained by sintering at 1000°C for 1 h, with about 16 μm in diameter and smooth surface.

AB - The yttrium aluminum garnet (YAG) fibers were prepared by the sol-gel method using aluminum chloride, aluminum powder, yttrium oxide and acetic acid as raw materials. The effect of the spinning additive on gel fibers length was studied. Long gel fibers were obtained by added polyvinylpyrrolidone (PVP) as an additive, with 23 cm in length. YAG fibers were obtained by sintering at 1000°C for 1 h, with about 16 μm in diameter and smooth surface.

KW - Fibers

KW - PVP

KW - Sol-gel method

KW - YAG

UR - https://www.scopus.com/pages/publications/84872447932

M3 - 文章

AN - SCOPUS:84872447932

SN - 0862-5468

VL - 56

SP - 187

EP - 190

JO - Ceramics - Silikaty

JF - Ceramics - Silikaty

IS - 3

ER -

Preparation of yttrium aluminum garnet fibers by the sol-gel method

Abstract

Keywords

Other files and links

Fingerprint

Cite this