Oxidation pre-treatment to improve the mechanical property and oxidation resistance of Si-Mo-Cr coated C/C composites

Qiangang Fu; Yucai Shan; Shiqi Wen; Hejun Li; Yanhui Chu; Xuesong Liu

doi:10.1016/j.corsci.2014.02.008

Oxidation pre-treatment to improve the mechanical property and oxidation resistance of Si-Mo-Cr coated C/C composites

Qiangang Fu
, Yucai Shan
, Shiqi Wen
, Hejun Li
, Yanhui Chu
, Xuesong Liu

School of Materials Sience and Engineering

Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

41 Scopus citations

Abstract

A transition layer with an interlocking structure was obtained at the interface between C/C composites and Si-Mo-Cr coating by oxidation pre-treatment and pack cementation process. The effects of pre-oxidation time on the microstructures, mechanical property and oxidation behavior of the coated C/C samples were investigated. After oxidation pre-treatment at 1173. K in air for 6. min, the flexural strength of the coated samples increases by 71.7% and the mass loss rate decreases by 77.4%. The improvements of the mechanical property and oxidation resistance are primarily attributed to the formation of the moderate transition layer between C/C and Si-Mo-Cr coating.

Original language	English
Pages (from-to)	103-110
Number of pages	8
Journal	Corrosion Science
Volume	83
DOIs	https://doi.org/10.1016/j.corsci.2014.02.008
State	Published - Jun 2014

Keywords

A. Ceramic matrix composites
C. High temperature corrosion
C. Oxidation

Access to Document

10.1016/j.corsci.2014.02.008

Cite this

@article{d8ae74911a054b1a8cfe6f3a5b808b1a,

title = "Oxidation pre-treatment to improve the mechanical property and oxidation resistance of Si-Mo-Cr coated C/C composites",

abstract = "A transition layer with an interlocking structure was obtained at the interface between C/C composites and Si-Mo-Cr coating by oxidation pre-treatment and pack cementation process. The effects of pre-oxidation time on the microstructures, mechanical property and oxidation behavior of the coated C/C samples were investigated. After oxidation pre-treatment at 1173. K in air for 6. min, the flexural strength of the coated samples increases by 71.7\% and the mass loss rate decreases by 77.4\%. The improvements of the mechanical property and oxidation resistance are primarily attributed to the formation of the moderate transition layer between C/C and Si-Mo-Cr coating.",

keywords = "A. Ceramic matrix composites, C. High temperature corrosion, C. Oxidation",

author = "Qiangang Fu and Yucai Shan and Shiqi Wen and Hejun Li and Yanhui Chu and Xuesong Liu",

year = "2014",

month = jun,

doi = "10.1016/j.corsci.2014.02.008",

language = "英语",

volume = "83",

pages = "103--110",

journal = "Corrosion Science",

issn = "0010-938X",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Oxidation pre-treatment to improve the mechanical property and oxidation resistance of Si-Mo-Cr coated C/C composites

AU - Fu, Qiangang

AU - Shan, Yucai

AU - Wen, Shiqi

AU - Li, Hejun

AU - Chu, Yanhui

AU - Liu, Xuesong

PY - 2014/6

Y1 - 2014/6

N2 - A transition layer with an interlocking structure was obtained at the interface between C/C composites and Si-Mo-Cr coating by oxidation pre-treatment and pack cementation process. The effects of pre-oxidation time on the microstructures, mechanical property and oxidation behavior of the coated C/C samples were investigated. After oxidation pre-treatment at 1173. K in air for 6. min, the flexural strength of the coated samples increases by 71.7% and the mass loss rate decreases by 77.4%. The improvements of the mechanical property and oxidation resistance are primarily attributed to the formation of the moderate transition layer between C/C and Si-Mo-Cr coating.

AB - A transition layer with an interlocking structure was obtained at the interface between C/C composites and Si-Mo-Cr coating by oxidation pre-treatment and pack cementation process. The effects of pre-oxidation time on the microstructures, mechanical property and oxidation behavior of the coated C/C samples were investigated. After oxidation pre-treatment at 1173. K in air for 6. min, the flexural strength of the coated samples increases by 71.7% and the mass loss rate decreases by 77.4%. The improvements of the mechanical property and oxidation resistance are primarily attributed to the formation of the moderate transition layer between C/C and Si-Mo-Cr coating.

KW - A. Ceramic matrix composites

KW - C. High temperature corrosion

KW - C. Oxidation

UR - https://www.scopus.com/pages/publications/84897113077

U2 - 10.1016/j.corsci.2014.02.008

DO - 10.1016/j.corsci.2014.02.008

M3 - 文章

AN - SCOPUS:84897113077

SN - 0010-938X

VL - 83

SP - 103

EP - 110

JO - Corrosion Science

JF - Corrosion Science

ER -

Oxidation pre-treatment to improve the mechanical property and oxidation resistance of Si-Mo-Cr coated C/C composites

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this