Organic Photovoltaics Printed via Sheet Electrospray Enabled by Quadrupole Electrodes

Developing manufacturing methods that are scalable and compatible with a roll-to-roll process with low waste of material has become a pressing need to transfer organic photovoltaics (OPVs) to a viable renewable energy source. For this purpose, various spray printing methods have been proposed. Among them, electrospray (ES) is an attractive option due to its negligible material waste, tunable droplet size, and tolerance to the substrate defects and roughness. Conventional ES with a circular spray footprint often makes the droplets well separated and unlikely to merge, giving rise to "coffee rings"which cause a rough and flawed film morphology. Here, a quadrupole electrode is introduced to generate a compressing electric field that squeezes the conical ES profile into the shape of a thin sheet. The numerical simulation and experimental data of the trajectories of sprayed droplets show that the quadrupole apparatus can effectively increase the long axis to short axis ratio of the oval spray footprint and hence bring droplets closer to each other and make the merging more likely for the deposited droplets. By promoting the merging of droplets, individual coffee rings are also suppressed. Thus, the quadrupole ES offers untapped opportunities for effectively reducing voids and improving the flatness of the ES-printed active layer. The devices with a PM6:N3 active layer printed by the sheet ES exhibited the highest power conversion efficiency (PCE) of up to 15.98%, which is a noticeable improvement over that (14.85%) of counterparts fabricated by a conventional conical ES. This is the highest PCE reported for ES-printed OPVs and is one of the most efficient spray-deposited OPVs so far. In addition, the all-spray-printed devices reached a PCE of 14.55%, which is also among the most efficient all-spray-printed OPVs.