Skip to main navigation Skip to search Skip to main content

Microstructural evolution and dynamic hot corrosion mechanisms of a TNM alloy in a simulated high-temperature salt spray environment

  • Biao Ma
  • , Bin Tang
  • , Xiaofei Chen
  • , Beibei Wei
  • , Xiang Zhang
  • , Huiqin Wang
  • , Xiangyu Pan
  • , Jinshan Li
  • Northwestern Polytechnical University Xian
  • China National Petroleum Corporation

Research output: Contribution to journal › Article › peer-review

Abstract

Novel dynamic salt spray equipment was developed to investigate the microstructural evolution and hot corrosion mechanisms of a Ti-43Al-4Nb-1Mo (TNM) alloy at 800 °C in a flowing atmosphere containing 90 wt% Na2SO4 and 10 wt% NaCl. The developed equipment continuously supplies atomized corrosive species under controlled airflow. It therefore reproduces several key dynamic features of aero-engine service conditions and simplifies the experimental procedure. The overall hot corrosion kinetics followed a subparabolic law, with an apparent exponent of n = 1.63. Cross-sectional observations revealed that the adherent multilayered corrosion scale stabilized at a thickness of approximately 4.95 μm after 50 h because of the repeated growth and spallation of the loosely bonded outer scale. The corrosion scale gradually developed a porous outer scale zone, a relatively dense Al-rich transition zone, and an Al-depleted interface zone tentatively interpreted as containing the Z-Ti5Al3O2 phase. Sulfate fluxing promoted the dissolution of protective oxides, while reactions involving chlorine facilitated gas formation and pore development. Rapid inward oxygen diffusion further contributed to the formation of the Al-depleted interface zone. These results establish a clear correlation between the hot corrosion kinetics and the evolution of the corrosion scale. The accumulation of interfacial voids, microcracks, and brittle phases progressively degraded the surface integrity of the alloy. This work provides an experimental basis and mechanistic understanding for evaluating TiAl alloys in dynamic high-temperature environments containing salt aerosols.

Original languageEnglish
Pages (from-to)1261-1270
Number of pages10
JournalProgress in Natural Science: Materials International
Volume36
Issue number5
DOIs
StatePublished - Oct 2026

Keywords

  • Dynamic salt spray equipment
  • Hot corrosion
  • Microstructure observation
  • TiAl alloy

Fingerprint

Dive into the research topics of 'Microstructural evolution and dynamic hot corrosion mechanisms of a TNM alloy in a simulated high-temperature salt spray environment'. Together they form a unique fingerprint.

Cite this