Abstract
Ceramic composites are valued for their high hardness, but their inherent brittleness makes their mechanical performance highly sensitive to processing routes. While additive manufacturing techniques such as direct ink writing (DIW) and digital light processing (DLP) enable the fabrication of complex ceramic geometries, the mechanical response of 3D-printed ceramics across different strain rates remains insufficiently understood, particularly regarding the role of sintering parameters. In this study, SiO₂- and Al₂O₃-based ceramics were fabricated via DIW, with DLP-printed Al₂O₃ included for comparison, and systematically sintered at temperatures of 1050, 1150, and 1250 °C with holding times of 0–2 h. Quasi-static and impact compressive tests were conducted to evaluate their mechanical behavior, while fracture morphologies were examined by scanning electron microscopy to elucidate deformation mechanisms. The results demonstrate that increasing sintering temperature and duration significantly improves compressive strength, with the optimal performance achieved at 1250 °C for 2 h. All materials exhibit pronounced strain-rate sensitivity, showing higher peak strength and strain under impact loading than under quasi-static conditions, with Al₂O₃ displaying greater sensitivity to sintering variations than SiO₂. Microstructural analysis reveals that higher sintering temperatures promote particle neck growth and the transition from open to closed porosity, enhancing the effective load-bearing area and reducing stress concentration. In addition, DLP-fabricated Al₂O₃ exhibits higher densification and superior dynamic compressive performance compared with DIW specimens.
| Original language | English |
|---|---|
| Journal | Journal of the Australian Ceramic Society |
| DOIs | |
| State | Accepted/In press - 2026 |
| Externally published | Yes |
Keywords
- 3D-printed ceramics
- Digital light processing
- Direct ink writing
- Impact compression
- Sintering parameters
Fingerprint
Dive into the research topics of 'Influence of sintering parameters on quasi-static and dynamic mechanical behavior of 3D-printed ceramics'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver