Hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys

Yu Zhang; Jinshan Li; Jun Wang; Sizhe Niu; Hongchao Kou

doi:10.3390/met6110277

Hot deformation behavior of as-cast and homogenized Al_0.5CoCrFeNi high entropy alloys

Yu Zhang
, Jinshan Li
, Jun Wang
, Sizhe Niu
, Hongchao Kou

School of Materials Sience and Engineering

Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

31 Scopus citations

Abstract

The hot deformation behavior of as-cast and homogenized Al_0.5CoCrFeNi high entropy alloys (HEAs) during isothermal compression was investigated as a function of temperature and strain rate. Results indicated that flow stress in a homogenized state was always higher than that in an as-cast state under the same deformation conditions. Moreover, the optimum thermo-mechanical processing (TMP) conditions for the hot working of the homogenized state were identified as 945-965 °C and 10^-1.7-10^-1.1 s^-1 and were easier to determine in practice. Constitutive equations, for both states, correlating the flow stress of Al_0.5CoCrFeNi with strain rate and deformation temperature were also determined.

Original language	English
Article number	277
Journal	Metals
Volume	6
Issue number	11
DOIs	https://doi.org/10.3390/met6110277
State	Published - 15 Nov 2016

Keywords

Constitutive equation
Flow stress
High entropy alloy
Homogenization
Processing map

Access to Document

10.3390/met6110277

Cite this

@article{34e93e787d2440da811fd618e5e0fcb8,

title = "Hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys",

abstract = "The hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys (HEAs) during isothermal compression was investigated as a function of temperature and strain rate. Results indicated that flow stress in a homogenized state was always higher than that in an as-cast state under the same deformation conditions. Moreover, the optimum thermo-mechanical processing (TMP) conditions for the hot working of the homogenized state were identified as 945-965 °C and 10-1.7-10-1.1 s-1 and were easier to determine in practice. Constitutive equations, for both states, correlating the flow stress of Al0.5CoCrFeNi with strain rate and deformation temperature were also determined.",

keywords = "Constitutive equation, Flow stress, High entropy alloy, Homogenization, Processing map",

author = "Yu Zhang and Jinshan Li and Jun Wang and Sizhe Niu and Hongchao Kou",

note = "Publisher Copyright: {\textcopyright} 2016 by the authors; licensee MDPI, Basel, Switzerland.",

year = "2016",

month = nov,

day = "15",

doi = "10.3390/met6110277",

language = "英语",

volume = "6",

journal = "Metals",

issn = "2075-4701",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "11",

}

TY - JOUR

T1 - Hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys

AU - Zhang, Yu

AU - Li, Jinshan

AU - Wang, Jun

AU - Niu, Sizhe

AU - Kou, Hongchao

PY - 2016/11/15

Y1 - 2016/11/15

N2 - The hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys (HEAs) during isothermal compression was investigated as a function of temperature and strain rate. Results indicated that flow stress in a homogenized state was always higher than that in an as-cast state under the same deformation conditions. Moreover, the optimum thermo-mechanical processing (TMP) conditions for the hot working of the homogenized state were identified as 945-965 °C and 10-1.7-10-1.1 s-1 and were easier to determine in practice. Constitutive equations, for both states, correlating the flow stress of Al0.5CoCrFeNi with strain rate and deformation temperature were also determined.

AB - The hot deformation behavior of as-cast and homogenized Al0.5CoCrFeNi high entropy alloys (HEAs) during isothermal compression was investigated as a function of temperature and strain rate. Results indicated that flow stress in a homogenized state was always higher than that in an as-cast state under the same deformation conditions. Moreover, the optimum thermo-mechanical processing (TMP) conditions for the hot working of the homogenized state were identified as 945-965 °C and 10-1.7-10-1.1 s-1 and were easier to determine in practice. Constitutive equations, for both states, correlating the flow stress of Al0.5CoCrFeNi with strain rate and deformation temperature were also determined.

KW - Constitutive equation

KW - Flow stress

KW - High entropy alloy

KW - Homogenization

KW - Processing map

UR - https://www.scopus.com/pages/publications/84998772031

U2 - 10.3390/met6110277

DO - 10.3390/met6110277

M3 - 文章

AN - SCOPUS:84998772031

SN - 2075-4701

VL - 6

JO - Metals

JF - Metals

IS - 11

M1 - 277

ER -

Hot deformation behavior of as-cast and homogenized Al_0.5CoCrFeNi high entropy alloys

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this