Skip to main navigation Skip to search Skip to main content

Heat treatment on the high-temperature oxidation behavior of Nb-Si-based alloy additively manufactured by electron beam powder bed fusion

  • Yajing Sun
  • , Huibin Jia
  • , Hui Chen
  • , Xin Lin
  • Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

Abstract

The present study examines the effect of different heat treatment schedules on the oxidation resistance of the Nb-16Si-10Ti-10Zr-3Al-3Cr-3Hf (at%) alloy fabricated by electron beam powder bed fusion (EB-PBF). The results show that the as-built sample is mainly composed of solid-solution niobium (Nbss) and Nb3Si, and the phase constitution and grain size remain nearly unchanged after hot isostatic pressing (HIP). In addition, the two-step heat treatment of 1300 °C for 30 h and 850 °C for 24 h was adopted for the HIP-processed samples. The weight gain per unit area of the sample after the two-step heat treatment is around 159.382 mg/cm2 after 100 h of oxidation at 1250 °C, which is about 30.24% lower than the as-built sample. The improved oxidation resistance can be attributed to the grain refinement, dispersed silicide-containing morphology, and the formation of a relatively more continuous multi-component oxide scale obtained after the two-step heat treatment.

Original languageEnglish
Article number191437
JournalJournal of Alloys and Compounds
Volume1082
DOIs
StatePublished - 31 Oct 2026

Keywords

  • Electron beam powder bed fusion
  • Microstructure
  • Niobium-silicon-based alloys
  • Oxidation
  • Two-step heat treatment

Fingerprint

Dive into the research topics of 'Heat treatment on the high-temperature oxidation behavior of Nb-Si-based alloy additively manufactured by electron beam powder bed fusion'. Together they form a unique fingerprint.

Cite this