Fabrication of carbon fiber reinforced SiC composites based on laser directed energy deposition

Carbon fiber reinforced silicon carbide ceramic matrix composites (CF/SiC) are widely applied in aerospace and other industries fields for its extraordinary properties. Nevertheless, traditional preparation processes encounter the challenges of long cyclicality, high economic cost due to the increasing requests. Consequently, this work integrates the CF/SiC composites with the novel laser directed energy deposition (L-DED) printing technology, which is differing from conventional 3D printing technology for it omits the post-processing procedure. CF/SiC composites are designed and manufactured efficiently, and the effects of carbon fiber addition are analyzed. Mechanical properties are utilized to characterize the internal bonding strength and the results reveal that the maximum flexural and compressive reach 119.33 ± 4.04 MPa and 396.20 ± 10.21 MPa, respectively, attributed to the enhanced crack propagation resistance caused by the carbon fiber addition. At the same time, this paper not only characterizes the performance through objective experimental data, but also expounds the formation mechanism of pores and cracks through material analysis. In conclusion, this work pioneers the application of L-DED molding technology to CF/SiC composites fabrication and validated its preparation capability, which not only improves the efficiency but also opens up a new path for CF/SiC composites preparation in the field of 3D printing.