Skip to main navigation Skip to search Skip to main content

Experimental study on the ignition characteristics of RP-3 kerosene in wide temperature range in the model aero-engine combustor

  • Rui Feng
  • , Yi Fu
  • , Penghui Liu
  • , Yuguang Jiang
  • , Wei Fan
  • Northwestern Polytechnical University Xian

Research output: Contribution to journal › Article › peer-review

Abstract

The ignition characteristics of aviation kerosene under wide temperature conditions are of critical importance for advanced aero-engine combustors employing Cooled Cooling Air (CCA) technology. In this study, the lean ignition characteristics of RP-3 kerosene at fuel temperatures (T f) of 20–440 °C were experimentally investigated in a model aero-engine combustor using schlieren visualization and time-resolved CH* chemiluminescence imaging. Two principal findings emerged. First, moderate preheating from T f = 20–150 °C accelerated fuel evaporation while largely retaining the droplet-dominated spray structure. The lean ignition fuel-air ratio (FAR) consequently decreased from 0.033 to 0.027, corresponding to the improvement of approximately 18%, with the best lean ignition performance obtained at T f = 150 °C. Second, further heating through the superheated and near-critical regimes increased the injection pressure and produced spray-cone contraction, unstable fuel distribution, and fragmented flame-kernel development. The associated deterioration in the coupling among injection, mixing, and flame-kernel survival increased the lean ignition FAR to a maximum of 0.046 when T f = 380 °C. At T f = 400–440 °C, the gas-like injection became more repeatable and early flame-kernel development was accelerated; however, the increased injection momentum and downstream fuel transport continued to limit fuel residence near the flame-stabilization region. Consequently, the lean ignition boundary stabilized at the FAR of approximately 0.04 rather than improving continuously. These results demonstrate that moderate fuel preheating benefits lean ignition, whereas near-critical and supercritical operation requires coordinated optimization of injection, mixing, and ignition organization.

Original languageEnglish
Article number132866
JournalApplied Thermal Engineering
Volume305
DOIs
StatePublished - Sep 2026

Keywords

  • Aero-engine combustor
  • Ignition characteristics
  • Lean ignition limit
  • Supercritical kerosene

Fingerprint

Dive into the research topics of 'Experimental study on the ignition characteristics of RP-3 kerosene in wide temperature range in the model aero-engine combustor'. Together they form a unique fingerprint.

Cite this