Experimental characterization of detonation initiation modes in a confined chamber flush-mounted with small-diameter ignition tubes

This work reports the experimental characterization of detonation initiation modes in a confined chamber in respect to the different types of reacting waves generated in various small-diameter ignition tubes. Depending on the length of the tube and mixtures composition, four types of reacting waves can be generated and utilized to initiate detonation in the main chamber, namely the over-driven detonation ignition wave, CJ detonation ignition wave, high-speed deflagration ignition wave and deflagration ignition wave. Based on the mechanisms of detonation initiation in the main chamber, four initiation modes can be observed: the direct initiation, the local explosion initiation, and the fast and slow deflagration-to-detonation transition (DDT) initiation. By comparing the detonation initiation positions and flame-tip velocities, the first two modes show appreciably shorter initiation distances compared to the DDT modes. The over-driven detonation ignition wave is shown to yield a high probability of direct initiation, while contrary to expectation, the high-speed deflagration ignition wave exhibits superior initiation performance compared to the CJ detonation ignition wave. It is illustrated that the energy decay through diffraction and the effect of precursor shock wave reflection on the wall of the rectangular chamber are viable factors responsible for this observation. The deflagration ignition wave is also shown to be able to rapidly initiate the detonation near the inlet of the chamber, albeit with a lower success rate.