Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming

Taihong Guan; Bo Gao; Xiaowei Lü; Xin Lin; Wen Zhao

doi:10.3788/CJL20093610.2717

Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming

Taihong Guan
, Bo Gao
, Xiaowei Lü
, Xin Lin
, Wen Zhao

School of Materials Sience and Engineering

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

The method of statistics factorial experiment was applied on the experiment. X-ray diffraction (XRD) was used to characterize the phases in coatings. Proper technologic parameters were found by evaluating the effect of technologic parameters of laser rapid forming on phases of bioceramic coatings. The results showed that CaO and CaTiO₃ were obtained with high laser power, while Ca₃(PO₄)₂(TCP) was obtained with low laser power. Laser power can not only affect the quantity of the phases in the coatings, but also their kinds. TCP was also obtained at high scanning velocity, while CaO and CaTiO₃ were obtained at low scanning velocity. The scanning velocity can only affect the quantity of the phases in the coatings. When the laser power was 800 W and the scanning velocity was 500 mm/min, bioceramic coatings with more TCP can be obtained.

Original language	English
Pages (from-to)	2717-2721
Number of pages	5
Journal	Zhongguo Jiguang/Chinese Journal of Lasers
Volume	36
Issue number	10
DOIs	https://doi.org/10.3788/CJL20093610.2717
State	Published - Oct 2009

Keywords

Bioceramic coating
Laser rapid forming
Laser technique
Technologic parameter
X-ray diffraction analysis

Access to Document

10.3788/CJL20093610.2717

Cite this

@article{d6728fd172c648e680f365ac9fdce109,

title = "Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming",

abstract = "The method of statistics factorial experiment was applied on the experiment. X-ray diffraction (XRD) was used to characterize the phases in coatings. Proper technologic parameters were found by evaluating the effect of technologic parameters of laser rapid forming on phases of bioceramic coatings. The results showed that CaO and CaTiO3 were obtained with high laser power, while Ca3(PO4)2(TCP) was obtained with low laser power. Laser power can not only affect the quantity of the phases in the coatings, but also their kinds. TCP was also obtained at high scanning velocity, while CaO and CaTiO3 were obtained at low scanning velocity. The scanning velocity can only affect the quantity of the phases in the coatings. When the laser power was 800 W and the scanning velocity was 500 mm/min, bioceramic coatings with more TCP can be obtained.",

keywords = "Bioceramic coating, Laser rapid forming, Laser technique, Technologic parameter, X-ray diffraction analysis",

author = "Taihong Guan and Bo Gao and Xiaowei L{\"u} and Xin Lin and Wen Zhao",

year = "2009",

month = oct,

doi = "10.3788/CJL20093610.2717",

language = "英语",

volume = "36",

pages = "2717--2721",

journal = "Zhongguo Jiguang/Chinese Journal of Lasers",

issn = "0258-7025",

publisher = "Science Press ",

number = "10",

}

TY - JOUR

T1 - Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming

AU - Guan, Taihong

AU - Gao, Bo

AU - Lü, Xiaowei

AU - Lin, Xin

AU - Zhao, Wen

PY - 2009/10

Y1 - 2009/10

N2 - The method of statistics factorial experiment was applied on the experiment. X-ray diffraction (XRD) was used to characterize the phases in coatings. Proper technologic parameters were found by evaluating the effect of technologic parameters of laser rapid forming on phases of bioceramic coatings. The results showed that CaO and CaTiO3 were obtained with high laser power, while Ca3(PO4)2(TCP) was obtained with low laser power. Laser power can not only affect the quantity of the phases in the coatings, but also their kinds. TCP was also obtained at high scanning velocity, while CaO and CaTiO3 were obtained at low scanning velocity. The scanning velocity can only affect the quantity of the phases in the coatings. When the laser power was 800 W and the scanning velocity was 500 mm/min, bioceramic coatings with more TCP can be obtained.

AB - The method of statistics factorial experiment was applied on the experiment. X-ray diffraction (XRD) was used to characterize the phases in coatings. Proper technologic parameters were found by evaluating the effect of technologic parameters of laser rapid forming on phases of bioceramic coatings. The results showed that CaO and CaTiO3 were obtained with high laser power, while Ca3(PO4)2(TCP) was obtained with low laser power. Laser power can not only affect the quantity of the phases in the coatings, but also their kinds. TCP was also obtained at high scanning velocity, while CaO and CaTiO3 were obtained at low scanning velocity. The scanning velocity can only affect the quantity of the phases in the coatings. When the laser power was 800 W and the scanning velocity was 500 mm/min, bioceramic coatings with more TCP can be obtained.

KW - Bioceramic coating

KW - Laser rapid forming

KW - Laser technique

KW - Technologic parameter

KW - X-ray diffraction analysis

UR - https://www.scopus.com/pages/publications/70749128196

U2 - 10.3788/CJL20093610.2717

DO - 10.3788/CJL20093610.2717

M3 - 文章

AN - SCOPUS:70749128196

SN - 0258-7025

VL - 36

SP - 2717

EP - 2721

JO - Zhongguo Jiguang/Chinese Journal of Lasers

JF - Zhongguo Jiguang/Chinese Journal of Lasers

IS - 10

ER -

Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this