Effect of counterface on the tribological behavior of Ti 3AlC2 at ambient

Jiqiang Ma; Fei Li; Licai Fu; Shengyu Zhu; Zhuhui Qiao; Jun Yang; Weimin Liu

doi:10.1007/s11249-013-0269-9

Effect of counterface on the tribological behavior of Ti ₃AlC₂ at ambient

Jiqiang Ma
, Fei Li
, Licai Fu
, Shengyu Zhu
, Zhuhui Qiao
, Jun Yang
, Weimin Liu

CAS - Lanzhou Institute of Chemical Physics

Research output: Contribution to journal › Article › peer-review

18 Scopus citations

Abstract

In this paper, we investigated the effect of counterface of AISI 52100 steel and ceramics of SiC, Al2O3, and Si3N4 on the tribological behavior of Ti₃AlC₂ at ambient. The results showed that the tribological properties of Ti₃AlC₂ are strongly dependent on the counterfaces. Under present test conditions, the tribocouple of Ti ₃AlC₂/ SiC exhibits lower coefficient of friction (CoF) 0.40, Ti₃AlC₂/AISI 52100 steel shows a rising CoF from 0.1 to 0.63, both Ti₃AlC₂/Si3N4 and Ti₃AlC ₂/Al2O3 tribopartners exhibit higher CoF of 1.22 in average. The Ti₃AlC₂ exhibits the lowest wear rate sliding against AISI 52100 steel, the wear rate of Ti₃AlC₂ sliding against Al2O3, Si3N4, and SiC are higher and comparable. The morphologies of the worn surfaces of the Ti₃AlC₂ are observed by scanning electron microscopy, and the element states are analyzed by X-ray photoelectron spectroscopy. The wear mechanisms are discussed.

Original language	English
Pages (from-to)	311-317
Number of pages	7
Journal	Tribology Letters
Volume	53
Issue number	1
DOIs	https://doi.org/10.1007/s11249-013-0269-9
State	Published - Jan 2014
Externally published	Yes

Keywords

Counterface
Friction and wear
MAX phases
TiAlC

Access to Document

10.1007/s11249-013-0269-9

Cite this

@article{350476c8b451455fa64a615685d0e88e,

title = "Effect of counterface on the tribological behavior of Ti 3AlC2 at ambient",

abstract = "In this paper, we investigated the effect of counterface of AISI 52100 steel and ceramics of SiC, Al2O3, and Si3N4 on the tribological behavior of Ti3AlC2 at ambient. The results showed that the tribological properties of Ti3AlC2 are strongly dependent on the counterfaces. Under present test conditions, the tribocouple of Ti 3AlC2/ SiC exhibits lower coefficient of friction (CoF) 0.40, Ti3AlC2/AISI 52100 steel shows a rising CoF from 0.1 to 0.63, both Ti3AlC2/Si3N4 and Ti3AlC 2/Al2O3 tribopartners exhibit higher CoF of 1.22 in average. The Ti3AlC2 exhibits the lowest wear rate sliding against AISI 52100 steel, the wear rate of Ti3AlC2 sliding against Al2O3, Si3N4, and SiC are higher and comparable. The morphologies of the worn surfaces of the Ti3AlC2 are observed by scanning electron microscopy, and the element states are analyzed by X-ray photoelectron spectroscopy. The wear mechanisms are discussed.",

keywords = "Counterface, Friction and wear, MAX phases, TiAlC",

author = "Jiqiang Ma and Fei Li and Licai Fu and Shengyu Zhu and Zhuhui Qiao and Jun Yang and Weimin Liu",

year = "2014",

month = jan,

doi = "10.1007/s11249-013-0269-9",

language = "英语",

volume = "53",

pages = "311--317",

journal = "Tribology Letters",

issn = "1023-8883",

publisher = "Springer Science and Business Media, LLC",

number = "1",

}

TY - JOUR

T1 - Effect of counterface on the tribological behavior of Ti 3AlC2 at ambient

AU - Ma, Jiqiang

AU - Li, Fei

AU - Fu, Licai

AU - Zhu, Shengyu

AU - Qiao, Zhuhui

AU - Yang, Jun

AU - Liu, Weimin

PY - 2014/1

Y1 - 2014/1

N2 - In this paper, we investigated the effect of counterface of AISI 52100 steel and ceramics of SiC, Al2O3, and Si3N4 on the tribological behavior of Ti3AlC2 at ambient. The results showed that the tribological properties of Ti3AlC2 are strongly dependent on the counterfaces. Under present test conditions, the tribocouple of Ti 3AlC2/ SiC exhibits lower coefficient of friction (CoF) 0.40, Ti3AlC2/AISI 52100 steel shows a rising CoF from 0.1 to 0.63, both Ti3AlC2/Si3N4 and Ti3AlC 2/Al2O3 tribopartners exhibit higher CoF of 1.22 in average. The Ti3AlC2 exhibits the lowest wear rate sliding against AISI 52100 steel, the wear rate of Ti3AlC2 sliding against Al2O3, Si3N4, and SiC are higher and comparable. The morphologies of the worn surfaces of the Ti3AlC2 are observed by scanning electron microscopy, and the element states are analyzed by X-ray photoelectron spectroscopy. The wear mechanisms are discussed.

AB - In this paper, we investigated the effect of counterface of AISI 52100 steel and ceramics of SiC, Al2O3, and Si3N4 on the tribological behavior of Ti3AlC2 at ambient. The results showed that the tribological properties of Ti3AlC2 are strongly dependent on the counterfaces. Under present test conditions, the tribocouple of Ti 3AlC2/ SiC exhibits lower coefficient of friction (CoF) 0.40, Ti3AlC2/AISI 52100 steel shows a rising CoF from 0.1 to 0.63, both Ti3AlC2/Si3N4 and Ti3AlC 2/Al2O3 tribopartners exhibit higher CoF of 1.22 in average. The Ti3AlC2 exhibits the lowest wear rate sliding against AISI 52100 steel, the wear rate of Ti3AlC2 sliding against Al2O3, Si3N4, and SiC are higher and comparable. The morphologies of the worn surfaces of the Ti3AlC2 are observed by scanning electron microscopy, and the element states are analyzed by X-ray photoelectron spectroscopy. The wear mechanisms are discussed.

KW - Counterface

KW - Friction and wear

KW - MAX phases

KW - TiAlC

UR - https://www.scopus.com/pages/publications/84892946763

U2 - 10.1007/s11249-013-0269-9

DO - 10.1007/s11249-013-0269-9

M3 - 文章

AN - SCOPUS:84892946763

SN - 1023-8883

VL - 53

SP - 311

EP - 317

JO - Tribology Letters

JF - Tribology Letters

IS - 1

ER -

Effect of counterface on the tribological behavior of Ti ₃AlC₂ at ambient

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this