Effect of Bi4Ti3O12 on microstructure and piezoelectric properties of 0.1BiYbO3-0.9PbTiO3 ceramics

Feng Gao; Hong Li Liu; Bo Zhang; Le Yang; Chang Sheng Tian

Effect of Bi₄Ti₃O₁₂ on microstructure and piezoelectric properties of 0.1BiYbO₃-0.9PbTiO₃ ceramics

Feng Gao, Hong Li Liu, Bo Zhang, Le Yang, Chang Sheng Tian

School of Materials Sience and Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

In this paper, piezoelectric ceramics 0.1BiYbO₃-0.9PbTiO₃ (BYPT) with high Curie temperature were prepared by using Bi₄Ti₃O₁₂ (BIT) as raw material. The effect of BIT content on the microstructure and electrical properties of BYPT ceramics was investigated. The results showed that the optimized sintering temperature was 1140°C. There were many phases coexisting in the BYPT ceramics with Curie temperature higher than 520°C. The Curie temperature T_C, the piezoelectric coefficient d₃₃ and the dielectric constant ε increased firstly and then decreased with increasing BIT content. The BYPT₂ ceramic had the highest Curie temperature and piezoelectric constant.

Original language	English
Pages (from-to)	86-89
Number of pages	4
Journal	Yadian Yu Shengguang/Piezoelectrics and Acoustooptics
Volume	32
Issue number	1
State	Published - Feb 2010

Keywords

Curie temperature
Dielectric properties
Microstructure
Piezoelectric ceramics

Cite this

@article{1f846eeb421249e9970fab02ffd1b5ad,

title = "Effect of Bi4Ti3O12 on microstructure and piezoelectric properties of 0.1BiYbO3-0.9PbTiO3 ceramics",

abstract = "In this paper, piezoelectric ceramics 0.1BiYbO3-0.9PbTiO3 (BYPT) with high Curie temperature were prepared by using Bi4Ti3O12 (BIT) as raw material. The effect of BIT content on the microstructure and electrical properties of BYPT ceramics was investigated. The results showed that the optimized sintering temperature was 1140°C. There were many phases coexisting in the BYPT ceramics with Curie temperature higher than 520°C. The Curie temperature TC, the piezoelectric coefficient d33 and the dielectric constant ε increased firstly and then decreased with increasing BIT content. The BYPT2 ceramic had the highest Curie temperature and piezoelectric constant.",

keywords = "Curie temperature, Dielectric properties, Microstructure, Piezoelectric ceramics",

author = "Feng Gao and Liu, {Hong Li} and Bo Zhang and Le Yang and Tian, {Chang Sheng}",

year = "2010",

month = feb,

language = "英语",

volume = "32",

pages = "86--89",

journal = "Yadian Yu Shengguang/Piezoelectrics and Acoustooptics",

issn = "1004-2474",

publisher = "Sichuan Institute of Piezoelectric and Acoustooptic Technology",

number = "1",

}

TY - JOUR

T1 - Effect of Bi4Ti3O12 on microstructure and piezoelectric properties of 0.1BiYbO3-0.9PbTiO3 ceramics

AU - Gao, Feng

AU - Liu, Hong Li

AU - Zhang, Bo

AU - Yang, Le

AU - Tian, Chang Sheng

PY - 2010/2

Y1 - 2010/2

N2 - In this paper, piezoelectric ceramics 0.1BiYbO3-0.9PbTiO3 (BYPT) with high Curie temperature were prepared by using Bi4Ti3O12 (BIT) as raw material. The effect of BIT content on the microstructure and electrical properties of BYPT ceramics was investigated. The results showed that the optimized sintering temperature was 1140°C. There were many phases coexisting in the BYPT ceramics with Curie temperature higher than 520°C. The Curie temperature TC, the piezoelectric coefficient d33 and the dielectric constant ε increased firstly and then decreased with increasing BIT content. The BYPT2 ceramic had the highest Curie temperature and piezoelectric constant.

AB - In this paper, piezoelectric ceramics 0.1BiYbO3-0.9PbTiO3 (BYPT) with high Curie temperature were prepared by using Bi4Ti3O12 (BIT) as raw material. The effect of BIT content on the microstructure and electrical properties of BYPT ceramics was investigated. The results showed that the optimized sintering temperature was 1140°C. There were many phases coexisting in the BYPT ceramics with Curie temperature higher than 520°C. The Curie temperature TC, the piezoelectric coefficient d33 and the dielectric constant ε increased firstly and then decreased with increasing BIT content. The BYPT2 ceramic had the highest Curie temperature and piezoelectric constant.

KW - Curie temperature

KW - Dielectric properties

KW - Microstructure

KW - Piezoelectric ceramics

UR - http://www.scopus.com/inward/record.url?scp=77950559290&partnerID=8YFLogxK

M3 - 文章

AN - SCOPUS:77950559290

SN - 1004-2474

VL - 32

SP - 86

EP - 89

JO - Yadian Yu Shengguang/Piezoelectrics and Acoustooptics

JF - Yadian Yu Shengguang/Piezoelectrics and Acoustooptics

IS - 1

ER -

Effect of Bi₄Ti₃O₁₂ on microstructure and piezoelectric properties of 0.1BiYbO₃-0.9PbTiO₃ ceramics

Abstract

Keywords

Other files and links

Fingerprint

Cite this