Skip to main navigation Skip to search Skip to main content

Droplet breakup in Y-shaped microchannels: Bypass-flow regimes and stage-dependent necking dynamics

  • Wenbo Luo
  • , Junwei Zhou
  • , Hao Qin
  • , Tianhang Yang
  • , Jingfan Xue
  • , Dujun Zeng
  • , Honglong Chang
  • , Lomakin Vladimir Olegovich
  • , Wen Zeng
  • Northwestern Polytechnical University Xian
  • Sichuan University
  • Bauman Moscow State Technical University
  • Zhejiang University

Research output: Contribution to journal › Article › peer-review

Abstract

Confined droplet breakup in Y-shaped bifurcating microchannels involves the coupled effects of geometric confinement, pressure redistribution, continuous-phase bypass flow, branch-induced deformation, and interfacial tension. In this study, a two-dimensional transient two-phase numerical model was employed to investigate the effects of bifurcation angle, initial droplet length, and continuous-phase capillary number on droplet breakup. Nine bifurcation angles ranging from 30° to 150° were considered. Based on the droplet blockage state and the connectivity of the continuous-phase bypass flow, four characteristic regimes were identified: non-breakup, breakup with permanent obstruction, breakup with partial obstruction, and breakup without obstruction. The breakup process was further divided into squeezing, transition, and rapid pinch-off stages. During the transition stage, liquid-bridge thinning is governed by the competition among pressure-driven deformation, viscous and extensional forcing, bypass-flow-mediated pressure release, and capillary restoration, whereas the final pinch-off is increasingly dominated by localized capillary effects. The bifurcation angle exhibits a pronounced non-monotonic influence on breakup dynamics. Intermediate angles of approximately 75°–90° provide the highest transition-stage necking efficiency, while either smaller or larger angles lead to slower sustained contraction. Although the effective extensional rate near the liquid bridge generally increases with bifurcation angle, the necking rate does not vary monotonically, indicating that extensional-flow intensity alone cannot determine breakup behavior. Instead, the angle dependence arises from the coupled regulation of flow redirection, droplet blockage, pressure transmission, bypass-flow connectivity, and liquid-bridge stretching. These results provide physical insight into angle-controlled droplet breakup and guidance for the design of passive droplet-splitting microfluidic structures.

Original languageEnglish
Article number102004
JournalPhysics of Fluids
Volume38
Issue number10
DOIs
StatePublished - 1 Oct 2026

Fingerprint

Dive into the research topics of 'Droplet breakup in Y-shaped microchannels: Bypass-flow regimes and stage-dependent necking dynamics'. Together they form a unique fingerprint.

Cite this