Skip to main navigation Skip to search Skip to main content

Deformation mechanisms and mechanical behaviors of magnesium alloys in light of the dislocation core structures dominated by composition-dependent 3D misfit potentials

  • Yu Liu
  • , Jinglian Du
  • , Kunyu Zhang
  • , Jianwei Xiao
  • , Xiaoye Zhou
  • , Wenjie Ou
  • , Yuchen Wu
  • , Yixuan Gao
  • , Jianlin Ma
  • , Feng Liu
  • Northwestern Polytechnical University Xian
  • CAS - Institute of Metal Research
  • Shenzhen MSU-BIT University

Research output: Contribution to journal › Article › peer-review

Abstract

Deformation mechanisms and mechanical behaviors of magnesium (Mg) alloys are essentially governed by the characteristics of dislocation core structures, which are dominated by the composition-dependent three-dimensional (3D) misfit potentials in terms of hexagonal-closed-packed (HCP) structure. In this work, the effects of additional solute X (X = Zn, Al, Li, Ag, Ca, Y, Gd and Sm) on the mechanical responses in light of dislocation core structures for Mg-0.39at.%X alloys are investigated within the framework of the semi-discrete variational Peierls-Nabarro (SVPN) model based on the stacking fault (SF) energy from first-principles calculations. The intrinsic I2 SF energy and unstable I2 SF energy of basal plane for HCP Mg is γI2b = 39.04 mJ/m2 and γUI2b = 107.69 mJ/m2, respectively, which corresponds to the equilibrium SF width of deq = 6.172 b and dislocation half-width of wx = 0.512 b and wz = 0.518 b. Additional Y can decrease the unstable SF energy of prismatic plane from γUSFp1 = 205.22 mJ/m2 to 158.09 mJ/m2, which can effectively promote prismatic slip and dislocation cross-slip, thus beneficial to strain accommodation and ductility of Mg alloys. Alloying with Li or Ag can increase γI2b, resulting in dislocation core structures with narrower SF zone than HCP Mg, which tends to suppress basal slip and facilitate non-basal slip and cross-slip, thus favorable for plastic deformability. In contrast, the additional solutes Zn, Al, Ca, Y, Gd, Sm can decrease γI2b and generate dislocation core structures with wider SF zone than HCP Mg, which benefit dislocation basal slip and deformation twinning expansion, thus favoring the ductility of Mg alloys. Such variations in dislocation core configurations and the corresponding deformation behaviors are further confirmed by comparison with molecular dynamics simulations and experimental findings. Our investigations clarify the intrinsic connections among the composition-dependent 3D misfit potentials, dislocation core structures, and deformation mechanisms of HCP Mg, which is benifical to design high-performer Mg alloys.

Original languageEnglish
Article number102212
JournalJournal of Magnesium and Alloys
Volume22
DOIs
StatePublished - Sep 2026

Keywords

  • 3D misfit potentials
  • Deformation mechanisms
  • Dislocation core structures
  • Magnesium alloys
  • Mechanical behaviors
  • Semi-discrete variational Peierls-Nabarro (SVPN) model

Fingerprint

Dive into the research topics of 'Deformation mechanisms and mechanical behaviors of magnesium alloys in light of the dislocation core structures dominated by composition-dependent 3D misfit potentials'. Together they form a unique fingerprint.

Cite this