Damping support fixture for vibration suppression in milling of thin-walled casing

Ming Luo; Xiaofan Zhang; Baohai Wu

doi:10.1109/AIM.2015.7222725

Damping support fixture for vibration suppression in milling of thin-walled casing

Ming Luo
, Xiaofan Zhang
, Baohai Wu

School of Mechanical Engineering

Northwestern Polytechnical University Xian

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Machining vibration is one of the main phenomenon occurs in milling of thin-walled workpiece, it will lead to poor surface finish and low machining efficiency. Especially for challenging situations such as large dimension closed casing, vibration is one of the main factors affecting the improvement of machining efficiency. In this work, a method by applying damping support fixtures for machining vibration suppression is developed. It can be mounted at different positions on the inner surface of casing to suppress vibration. This method has been validated by finite element simulation and cutting experiments. The results show that vibration can be suppressed with the presence of damping support fixtures. The new method can be used to get higher machining efficiency and better surface finish in milling of thin-walled casing.

Original language	English
Title of host publication	AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1346-1349
Number of pages	4
ISBN (Electronic)	9781467391078
DOIs	https://doi.org/10.1109/AIM.2015.7222725
State	Published - 25 Aug 2015
Event	IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2015 - Busan, Korea, Republic of Duration: 7 Jul 2015 → 11 Jul 2015

Publication series

Name	IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
Volume	2015-August

Conference

Conference	IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2015
Country/Territory	Korea, Republic of
City	Busan
Period	7/07/15 → 11/07/15

Access to Document

10.1109/AIM.2015.7222725

Cite this

Luo, M., Zhang, X., & Wu, B. (2015). Damping support fixture for vibration suppression in milling of thin-walled casing. In AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (pp. 1346-1349). Article 7222725 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; Vol. 2015-August). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AIM.2015.7222725

Luo, Ming ; Zhang, Xiaofan ; Wu, Baohai. / Damping support fixture for vibration suppression in milling of thin-walled casing. AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 1346-1349 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

@inproceedings{fac14833f6ea4d67bf5f236887080419,

title = "Damping support fixture for vibration suppression in milling of thin-walled casing",

abstract = "Machining vibration is one of the main phenomenon occurs in milling of thin-walled workpiece, it will lead to poor surface finish and low machining efficiency. Especially for challenging situations such as large dimension closed casing, vibration is one of the main factors affecting the improvement of machining efficiency. In this work, a method by applying damping support fixtures for machining vibration suppression is developed. It can be mounted at different positions on the inner surface of casing to suppress vibration. This method has been validated by finite element simulation and cutting experiments. The results show that vibration can be suppressed with the presence of damping support fixtures. The new method can be used to get higher machining efficiency and better surface finish in milling of thin-walled casing.",

author = "Ming Luo and Xiaofan Zhang and Baohai Wu",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2015 ; Conference date: 07-07-2015 Through 11-07-2015",

year = "2015",

month = aug,

day = "25",

doi = "10.1109/AIM.2015.7222725",

language = "英语",

series = "IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1346--1349",

booktitle = "AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics",

}

Luo, M, Zhang, X & Wu, B 2015, Damping support fixture for vibration suppression in milling of thin-walled casing. in AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics., 7222725, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, vol. 2015-August, Institute of Electrical and Electronics Engineers Inc., pp. 1346-1349, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2015, Busan, Korea, Republic of, 7/07/15. https://doi.org/10.1109/AIM.2015.7222725

Damping support fixture for vibration suppression in milling of thin-walled casing. / Luo, Ming; Zhang, Xiaofan; Wu, Baohai.
AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., 2015. p. 1346-1349 7222725 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; Vol. 2015-August).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Damping support fixture for vibration suppression in milling of thin-walled casing

AU - Luo, Ming

AU - Zhang, Xiaofan

AU - Wu, Baohai

PY - 2015/8/25

Y1 - 2015/8/25

N2 - Machining vibration is one of the main phenomenon occurs in milling of thin-walled workpiece, it will lead to poor surface finish and low machining efficiency. Especially for challenging situations such as large dimension closed casing, vibration is one of the main factors affecting the improvement of machining efficiency. In this work, a method by applying damping support fixtures for machining vibration suppression is developed. It can be mounted at different positions on the inner surface of casing to suppress vibration. This method has been validated by finite element simulation and cutting experiments. The results show that vibration can be suppressed with the presence of damping support fixtures. The new method can be used to get higher machining efficiency and better surface finish in milling of thin-walled casing.

AB - Machining vibration is one of the main phenomenon occurs in milling of thin-walled workpiece, it will lead to poor surface finish and low machining efficiency. Especially for challenging situations such as large dimension closed casing, vibration is one of the main factors affecting the improvement of machining efficiency. In this work, a method by applying damping support fixtures for machining vibration suppression is developed. It can be mounted at different positions on the inner surface of casing to suppress vibration. This method has been validated by finite element simulation and cutting experiments. The results show that vibration can be suppressed with the presence of damping support fixtures. The new method can be used to get higher machining efficiency and better surface finish in milling of thin-walled casing.

UR - https://www.scopus.com/pages/publications/84951103006

U2 - 10.1109/AIM.2015.7222725

DO - 10.1109/AIM.2015.7222725

M3 - 会议稿件

AN - SCOPUS:84951103006

T3 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM

SP - 1346

EP - 1349

BT - AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2015

Y2 - 7 July 2015 through 11 July 2015

ER -

Luo M, Zhang X, Wu B. Damping support fixture for vibration suppression in milling of thin-walled casing. In AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc. 2015. p. 1346-1349. 7222725. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM). doi: 10.1109/AIM.2015.7222725

Damping support fixture for vibration suppression in milling of thin-walled casing

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this